This is the latest recevied telemetry packets stored in our database for station/object SP3PSM-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1781231624 | 177 Count | 971 Count | 160 Count | 0 VDC | 0 VDC |
| 1781229823 | 168 Count | 942 Count | 152 Count | 0 VDC | 0 VDC |
| 1781228022 | 158 Count | 906 Count | 143 Count | 0 VDC | 0 VDC |
| 1781226222 | 149 Count | 874 Count | 135 Count | 0 VDC | 0 VDC |
| 1781224421 | 136 Count | 834 Count | 123 Count | 0 VDC | 0 VDC |
| 1781222620 | 127 Count | 805 Count | 115 Count | 0 VDC | 0 VDC |
| 1781220819 | 118 Count | 772 Count | 107 Count | 0 VDC | 0 VDC |
| 1781219018 | 108 Count | 739 Count | 98 Count | 0 VDC | 0 VDC |
| 1781217218 | 92 Count | 684 Count | 83 Count | 0 VDC | 0 VDC |
| 1781215417 | 79 Count | 628 Count | 71 Count | 0 VDC | 0 VDC |
| 1781213616 | 67 Count | 565 Count | 60 Count | 0 VDC | 0 VDC |
| 1781211824 | 55 Count | 534 Count | 53 Count | 0 VDC | 0 VDC |
| 1781210023 | 44 Count | 421 Count | 43 Count | 0 VDC | 0 VDC |
| 1781208222 | 28 Count | 197 Count | 28 Count | 0 VDC | 0 VDC |
| 1781206421 | 200 Count | 1138 Count | 195 Count | 0 VDC | 0 VDC |
| 1781204621 | 144 Count | 884 Count | 140 Count | 0 VDC | 0 VDC |
| 1781202820 | 131 Count | 786 Count | 128 Count | 0 VDC | 0 VDC |
| 1781201019 | 108 Count | 570 Count | 106 Count | 0 VDC | 0 VDC |
| 1781199218 | 41 Count | 340 Count | 40 Count | 0 VDC | 0 VDC |
| 1781197417 | 20 Count | 201 Count | 20 Count | 0 VDC | 0 VDC |
| 1781195617 | 63 Count | 1046 Count | 55 Count | 0 VDC | 0 VDC |
| 1781193816 | 54 Count | 925 Count | 47 Count | 0 VDC | 0 VDC |
| 1781192015 | 48 Count | 770 Count | 42 Count | 0 VDC | 0 VDC |
| 1781190223 | 31 Count | 516 Count | 30 Count | 0 VDC | 0 VDC |
| 1781188422 | 12 Count | 323 Count | 12 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)