This is the latest recevied telemetry packets stored in our database for station/object SP8G-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1777890272 | 127 Count | 380 Count | 120 Count | 4.3 VDC | 0 VDC |
| 1777889371 | 90 Count | 309 Count | 84 Count | 4.28 VDC | 0 VDC |
| 1777888470 | 68 Count | 235 Count | 63 Count | 4.27 VDC | 0 VDC |
| 1777887569 | 57 Count | 163 Count | 53 Count | 4.24 VDC | 0 VDC |
| 1777886669 | 45 Count | 114 Count | 42 Count | 4.21 VDC | 0 VDC |
| 1777885768 | 36 Count | 89 Count | 34 Count | 4.19 VDC | 0 VDC |
| 1777884867 | 24 Count | 57 Count | 23 Count | 4.17 VDC | 0 VDC |
| 1777883966 | 11 Count | 25 Count | 11 Count | 4.15 VDC | 0 VDC |
| 1777883066 | 317 Count | 1020 Count | 291 Count | 4.13 VDC | 0 VDC |
| 1777882165 | 305 Count | 995 Count | 280 Count | 4.12 VDC | 0 VDC |
| 1777881264 | 293 Count | 951 Count | 269 Count | 4.11 VDC | 0 VDC |
| 1777880364 | 283 Count | 925 Count | 260 Count | 4.1 VDC | 0 VDC |
| 1777879463 | 270 Count | 898 Count | 248 Count | 4.09 VDC | 0 VDC |
| 1777878561 | 256 Count | 861 Count | 235 Count | 4.07 VDC | 0 VDC |
| 1777877661 | 244 Count | 837 Count | 224 Count | 4.05 VDC | 0 VDC |
| 1777875860 | 217 Count | 762 Count | 199 Count | 4.02 VDC | 0 VDC |
| 1777874058 | 187 Count | 672 Count | 171 Count | 4 VDC | 0 VDC |
| 1777873158 | 175 Count | 621 Count | 160 Count | 3.99 VDC | 0 VDC |
| 1777872257 | 159 Count | 574 Count | 145 Count | 3.98 VDC | 0 VDC |
| 1777871356 | 142 Count | 522 Count | 129 Count | 3.96 VDC | 0 VDC |
| 1777870455 | 127 Count | 475 Count | 115 Count | 3.98 VDC | 0 VDC |
| 1777869554 | 112 Count | 435 Count | 101 Count | 3.96 VDC | 0 VDC |
| 1777868670 | 98 Count | 389 Count | 92 Count | 3.98 VDC | 0 VDC |
| 1777867770 | 82 Count | 339 Count | 77 Count | 3.98 VDC | 0 VDC |
| 1777866869 | 65 Count | 283 Count | 61 Count | 3.98 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)