This is the latest recevied telemetry packets stored in our database for station/object SP6TK-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1751984579 | 300 Count | 847 Count | 134 Count | 0 VDC | 0 VDC |
| 1751983378 | 297 Count | 818 Count | 133 Count | 0 VDC | 0 VDC |
| 1751982178 | 295 Count | 812 Count | 133 Count | 0 VDC | 0 VDC |
| 1751980977 | 292 Count | 807 Count | 132 Count | 0 VDC | 0 VDC |
| 1751979776 | 264 Count | 775 Count | 106 Count | 0 VDC | 0 VDC |
| 1751978575 | 262 Count | 770 Count | 106 Count | 0 VDC | 0 VDC |
| 1751977375 | 259 Count | 761 Count | 105 Count | 0 VDC | 0 VDC |
| 1751976174 | 256 Count | 755 Count | 104 Count | 0 VDC | 0 VDC |
| 1751974973 | 254 Count | 748 Count | 104 Count | 0 VDC | 0 VDC |
| 1751973772 | 250 Count | 741 Count | 102 Count | 0 VDC | 0 VDC |
| 1751972571 | 246 Count | 734 Count | 100 Count | 0 VDC | 0 VDC |
| 1751971370 | 243 Count | 728 Count | 99 Count | 0 VDC | 0 VDC |
| 1751970170 | 239 Count | 718 Count | 97 Count | 0 VDC | 0 VDC |
| 1751968969 | 235 Count | 709 Count | 95 Count | 0 VDC | 0 VDC |
| 1751967768 | 232 Count | 702 Count | 94 Count | 0 VDC | 0 VDC |
| 1751966567 | 229 Count | 694 Count | 92 Count | 0 VDC | 0 VDC |
| 1751965380 | 221 Count | 687 Count | 90 Count | 0 VDC | 0 VDC |
| 1751964179 | 219 Count | 681 Count | 90 Count | 0 VDC | 0 VDC |
| 1751962978 | 214 Count | 674 Count | 87 Count | 0 VDC | 0 VDC |
| 1751961777 | 210 Count | 667 Count | 85 Count | 0 VDC | 0 VDC |
| 1751960576 | 207 Count | 661 Count | 84 Count | 0 VDC | 0 VDC |
| 1751959376 | 203 Count | 653 Count | 82 Count | 0 VDC | 0 VDC |
| 1751958175 | 199 Count | 641 Count | 80 Count | 0 VDC | 0 VDC |
| 1751956974 | 196 Count | 633 Count | 79 Count | 0 VDC | 0 VDC |
| 1751955773 | 191 Count | 617 Count | 76 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)