This is the latest recevied telemetry packets stored in our database for station/object SP9EPW-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1766375078 | 266 Count | 995 Count | 212 Count | 0 VDC | 0 VDC |
| 1766373278 | 260 Count | 962 Count | 207 Count | 0 VDC | 0 VDC |
| 1766371477 | 254 Count | 940 Count | 202 Count | 0 VDC | 0 VDC |
| 1766369676 | 250 Count | 919 Count | 199 Count | 0 VDC | 0 VDC |
| 1766367876 | 245 Count | 897 Count | 195 Count | 0 VDC | 0 VDC |
| 1766366075 | 240 Count | 876 Count | 191 Count | 0 VDC | 0 VDC |
| 1766364274 | 234 Count | 851 Count | 186 Count | 0 VDC | 0 VDC |
| 1766362472 | 229 Count | 827 Count | 182 Count | 0 VDC | 0 VDC |
| 1766358879 | 214 Count | 783 Count | 173 Count | 0 VDC | 0 VDC |
| 1766357080 | 208 Count | 763 Count | 168 Count | 0 VDC | 0 VDC |
| 1766355278 | 203 Count | 744 Count | 164 Count | 0 VDC | 0 VDC |
| 1766353478 | 197 Count | 725 Count | 159 Count | 0 VDC | 0 VDC |
| 1766351677 | 191 Count | 700 Count | 154 Count | 0 VDC | 0 VDC |
| 1766349876 | 185 Count | 680 Count | 149 Count | 0 VDC | 0 VDC |
| 1766348074 | 179 Count | 660 Count | 144 Count | 0 VDC | 0 VDC |
| 1766346277 | 173 Count | 630 Count | 139 Count | 0 VDC | 0 VDC |
| 1766344476 | 167 Count | 613 Count | 134 Count | 0 VDC | 0 VDC |
| 1766342673 | 161 Count | 593 Count | 129 Count | 0 VDC | 0 VDC |
| 1766339078 | 150 Count | 562 Count | 120 Count | 0 VDC | 0 VDC |
| 1766337280 | 140 Count | 541 Count | 115 Count | 0 VDC | 0 VDC |
| 1766335481 | 134 Count | 520 Count | 110 Count | 0 VDC | 0 VDC |
| 1766333680 | 128 Count | 503 Count | 105 Count | 0 VDC | 0 VDC |
| 1766331877 | 122 Count | 484 Count | 100 Count | 0 VDC | 0 VDC |
| 1766330076 | 116 Count | 454 Count | 95 Count | 0 VDC | 0 VDC |
| 1766328277 | 110 Count | 437 Count | 90 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)