This is the latest recevied telemetry packets stored in our database for station/object SP2SGL-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1773811357 | 534 Count | 690 Count | 428 Count | 0 VDC | 0 VDC |
| 1773809556 | 510 Count | 654 Count | 405 Count | 0 VDC | 0 VDC |
| 1773807756 | 484 Count | 623 Count | 380 Count | 0 VDC | 0 VDC |
| 1773805955 | 457 Count | 588 Count | 354 Count | 0 VDC | 0 VDC |
| 1773804154 | 434 Count | 558 Count | 332 Count | 0 VDC | 0 VDC |
| 1773802353 | 413 Count | 529 Count | 312 Count | 0 VDC | 0 VDC |
| 1773800561 | 384 Count | 491 Count | 284 Count | 0 VDC | 0 VDC |
| 1773798760 | 373 Count | 475 Count | 274 Count | 0 VDC | 0 VDC |
| 1773796959 | 366 Count | 467 Count | 268 Count | 0 VDC | 0 VDC |
| 1773795159 | 362 Count | 462 Count | 265 Count | 0 VDC | 0 VDC |
| 1773793358 | 356 Count | 455 Count | 260 Count | 0 VDC | 0 VDC |
| 1773791557 | 352 Count | 450 Count | 257 Count | 0 VDC | 0 VDC |
| 1773789756 | 348 Count | 445 Count | 254 Count | 0 VDC | 0 VDC |
| 1773787956 | 345 Count | 441 Count | 252 Count | 0 VDC | 0 VDC |
| 1773786155 | 341 Count | 436 Count | 249 Count | 0 VDC | 0 VDC |
| 1773784354 | 336 Count | 430 Count | 245 Count | 0 VDC | 0 VDC |
| 1773782553 | 332 Count | 425 Count | 242 Count | 0 VDC | 0 VDC |
| 1773780753 | 327 Count | 419 Count | 238 Count | 0 VDC | 0 VDC |
| 1773778960 | 321 Count | 412 Count | 233 Count | 0 VDC | 0 VDC |
| 1773777159 | 314 Count | 404 Count | 227 Count | 0 VDC | 0 VDC |
| 1773775359 | 307 Count | 396 Count | 221 Count | 0 VDC | 0 VDC |
| 1773773558 | 303 Count | 391 Count | 218 Count | 0 VDC | 0 VDC |
| 1773771757 | 296 Count | 384 Count | 212 Count | 0 VDC | 0 VDC |
| 1773769956 | 290 Count | 377 Count | 207 Count | 0 VDC | 0 VDC |
| 1773768155 | 286 Count | 372 Count | 204 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)