This is the latest recevied telemetry packets stored in our database for station/object F4MLV-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1774018763 | 589 Count | 902 Count | 476 Count | 0 VDC | 0 VDC |
| 1774016959 | 553 Count | 850 Count | 447 Count | 0 VDC | 0 VDC |
| 1774015155 | 514 Count | 796 Count | 415 Count | 0 VDC | 0 VDC |
| 1774013350 | 480 Count | 740 Count | 388 Count | 0 VDC | 0 VDC |
| 1774013315 | 479 Count | 740 Count | 388 Count | 0 VDC | 0 VDC |
| 1774012955 | 478 Count | 740 Count | 388 Count | 0 VDC | 0 VDC |
| 1774011151 | 439 Count | 692 Count | 356 Count | 0 VDC | 0 VDC |
| 1774009347 | 401 Count | 642 Count | 328 Count | 0 VDC | 0 VDC |
| 1774007544 | 356 Count | 574 Count | 291 Count | 0 VDC | 0 VDC |
| 1773959127 | 355 Count | 574 Count | 291 Count | 0 VDC | 0 VDC |
| 1773957323 | 312 Count | 505 Count | 255 Count | 0 VDC | 0 VDC |
| 1773955518 | 278 Count | 441 Count | 228 Count | 0 VDC | 0 VDC |
| 1773953715 | 241 Count | 379 Count | 198 Count | 0 VDC | 0 VDC |
| 1773951911 | 199 Count | 312 Count | 164 Count | 0 VDC | 0 VDC |
| 1773950107 | 158 Count | 243 Count | 130 Count | 0 VDC | 0 VDC |
| 1773948303 | 119 Count | 186 Count | 98 Count | 0 VDC | 0 VDC |
| 1773946500 | 77 Count | 119 Count | 63 Count | 0 VDC | 0 VDC |
| 1773944696 | 41 Count | 58 Count | 34 Count | 0 VDC | 0 VDC |
| 1773942892 | 718 Count | 1056 Count | 621 Count | 0 VDC | 0 VDC |
| 1773941089 | 671 Count | 988 Count | 581 Count | 0 VDC | 0 VDC |
| 1773939330 | 614 Count | 919 Count | 531 Count | 0 VDC | 0 VDC |
| 1773937527 | 557 Count | 857 Count | 481 Count | 0 VDC | 0 VDC |
| 1773935723 | 516 Count | 797 Count | 447 Count | 0 VDC | 0 VDC |
| 1773933919 | 478 Count | 741 Count | 416 Count | 0 VDC | 0 VDC |
| 1773932115 | 435 Count | 683 Count | 380 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)