This is the latest recevied telemetry packets stored in our database for station/object UN9GIE-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1781806941 | 206 Count | 838 Count | 0 Count | 0 VDC | 0 VDC |
| 1781806337 | 205 Count | 834 Count | 0 Count | 0 VDC | 0 VDC |
| 1781805733 | 204 Count | 830 Count | 0 Count | 0 VDC | 0 VDC |
| 1781805130 | 203 Count | 822 Count | 0 Count | 0 VDC | 0 VDC |
| 1781804526 | 202 Count | 817 Count | 0 Count | 0 VDC | 0 VDC |
| 1781803923 | 201 Count | 814 Count | 0 Count | 0 VDC | 0 VDC |
| 1781803320 | 200 Count | 807 Count | 0 Count | 0 VDC | 0 VDC |
| 1781802716 | 199 Count | 802 Count | 0 Count | 0 VDC | 0 VDC |
| 1781802112 | 198 Count | 798 Count | 0 Count | 0 VDC | 0 VDC |
| 1781801509 | 197 Count | 791 Count | 0 Count | 0 VDC | 0 VDC |
| 1781800906 | 196 Count | 786 Count | 0 Count | 0 VDC | 0 VDC |
| 1781800302 | 195 Count | 782 Count | 0 Count | 0 VDC | 0 VDC |
| 1781799699 | 194 Count | 776 Count | 0 Count | 0 VDC | 0 VDC |
| 1781777618 | 157 Count | 647 Count | 0 Count | 0 VDC | 0 VDC |
| 1781777014 | 156 Count | 643 Count | 0 Count | 0 VDC | 0 VDC |
| 1781776410 | 155 Count | 638 Count | 0 Count | 0 VDC | 0 VDC |
| 1781775807 | 154 Count | 636 Count | 0 Count | 0 VDC | 0 VDC |
| 1781775203 | 153 Count | 632 Count | 0 Count | 0 VDC | 0 VDC |
| 1781774600 | 152 Count | 626 Count | 0 Count | 0 VDC | 0 VDC |
| 1781773996 | 151 Count | 624 Count | 0 Count | 0 VDC | 0 VDC |
| 1781773393 | 150 Count | 621 Count | 0 Count | 0 VDC | 0 VDC |
| 1781772790 | 149 Count | 616 Count | 0 Count | 0 VDC | 0 VDC |
| 1781772186 | 148 Count | 611 Count | 0 Count | 0 VDC | 0 VDC |
| 1781771583 | 147 Count | 607 Count | 0 Count | 0 VDC | 0 VDC |
| 1781770979 | 146 Count | 602 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)