This is the latest recevied telemetry packets stored in our database for station/object F5ZYM-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1777868087 | 475 Count | 940 Count | 442 Count | 0 VDC | 0 VDC |
| 1777867183 | 462 Count | 914 Count | 430 Count | 0 VDC | 0 VDC |
| 1777866279 | 450 Count | 892 Count | 419 Count | 0 VDC | 0 VDC |
| 1777865375 | 434 Count | 865 Count | 404 Count | 0 VDC | 0 VDC |
| 1777864471 | 422 Count | 838 Count | 393 Count | 0 VDC | 0 VDC |
| 1777863567 | 406 Count | 811 Count | 378 Count | 0 VDC | 0 VDC |
| 1777862663 | 391 Count | 782 Count | 364 Count | 0 VDC | 0 VDC |
| 1777861857 | 380 Count | 761 Count | 354 Count | 0 VDC | 0 VDC |
| 1777860952 | 365 Count | 732 Count | 340 Count | 0 VDC | 0 VDC |
| 1777860048 | 352 Count | 707 Count | 328 Count | 0 VDC | 0 VDC |
| 1777859144 | 336 Count | 676 Count | 313 Count | 0 VDC | 0 VDC |
| 1777858240 | 320 Count | 646 Count | 298 Count | 0 VDC | 0 VDC |
| 1777857336 | 304 Count | 612 Count | 283 Count | 0 VDC | 0 VDC |
| 1777856432 | 289 Count | 585 Count | 269 Count | 0 VDC | 0 VDC |
| 1777855528 | 274 Count | 555 Count | 255 Count | 0 VDC | 0 VDC |
| 1777854624 | 260 Count | 532 Count | 242 Count | 0 VDC | 0 VDC |
| 1777853720 | 246 Count | 507 Count | 229 Count | 0 VDC | 0 VDC |
| 1777852816 | 232 Count | 476 Count | 216 Count | 0 VDC | 0 VDC |
| 1777851911 | 217 Count | 450 Count | 202 Count | 0 VDC | 0 VDC |
| 1777851007 | 203 Count | 420 Count | 189 Count | 0 VDC | 0 VDC |
| 1777850102 | 189 Count | 393 Count | 176 Count | 0 VDC | 0 VDC |
| 1777849198 | 175 Count | 367 Count | 163 Count | 0 VDC | 0 VDC |
| 1777848294 | 162 Count | 338 Count | 151 Count | 0 VDC | 0 VDC |
| 1777847389 | 150 Count | 313 Count | 140 Count | 0 VDC | 0 VDC |
| 1777846485 | 137 Count | 289 Count | 128 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)