This is the latest recevied telemetry packets stored in our database for station/object SR9EMP. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1763103976 | 35 Count | 357 Count | 35 Count | 0 VDC | 0 VDC |
| 1763102175 | 121 Count | 1382 Count | 117 Count | 0 VDC | 0 VDC |
| 1763100374 | 86 Count | 990 Count | 83 Count | 0 VDC | 0 VDC |
| 1763098573 | 61 Count | 754 Count | 59 Count | 0 VDC | 0 VDC |
| 1763096772 | 42 Count | 534 Count | 41 Count | 0 VDC | 0 VDC |
| 1763094971 | 26 Count | 303 Count | 26 Count | 0 VDC | 0 VDC |
| 1763093170 | 99 Count | 1070 Count | 95 Count | 0 VDC | 0 VDC |
| 1763091369 | 79 Count | 848 Count | 76 Count | 0 VDC | 0 VDC |
| 1763089568 | 57 Count | 608 Count | 55 Count | 0 VDC | 0 VDC |
| 1763087784 | 37 Count | 415 Count | 36 Count | 0 VDC | 0 VDC |
| 1763085983 | 15 Count | 212 Count | 15 Count | 0 VDC | 0 VDC |
| 1763084182 | 113 Count | 1178 Count | 107 Count | 0 VDC | 0 VDC |
| 1763082382 | 94 Count | 993 Count | 89 Count | 0 VDC | 0 VDC |
| 1763080580 | 72 Count | 784 Count | 68 Count | 0 VDC | 0 VDC |
| 1763078780 | 53 Count | 589 Count | 50 Count | 0 VDC | 0 VDC |
| 1763076978 | 35 Count | 405 Count | 33 Count | 0 VDC | 0 VDC |
| 1763075177 | 16 Count | 209 Count | 15 Count | 0 VDC | 0 VDC |
| 1763073377 | 110 Count | 1186 Count | 105 Count | 0 VDC | 0 VDC |
| 1763071576 | 93 Count | 941 Count | 89 Count | 0 VDC | 0 VDC |
| 1763069775 | 75 Count | 735 Count | 72 Count | 0 VDC | 0 VDC |
| 1763067974 | 58 Count | 527 Count | 56 Count | 0 VDC | 0 VDC |
| 1763066775 | 37 Count | 369 Count | 36 Count | 0 VDC | 0 VDC |
| 1763064974 | 17 Count | 167 Count | 17 Count | 0 VDC | 0 VDC |
| 1763063174 | 335 Count | 1075 Count | 89 Count | 0 VDC | 0 VDC |
| 1763061373 | 312 Count | 835 Count | 68 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)