This is the latest recevied telemetry packets stored in our database for station/object SP2KFL-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1778176092 | 322 Count | 978 Count | 307 Count | 4.09 VDC | 0 VDC |
| 1778174291 | 300 Count | 912 Count | 286 Count | 4.11 VDC | 0 VDC |
| 1778172491 | 280 Count | 848 Count | 267 Count | 4.08 VDC | 0 VDC |
| 1778170690 | 264 Count | 775 Count | 252 Count | 4.08 VDC | 0 VDC |
| 1778168898 | 239 Count | 703 Count | 232 Count | 4.11 VDC | 0 VDC |
| 1778167097 | 221 Count | 644 Count | 215 Count | 4.11 VDC | 0 VDC |
| 1778165296 | 205 Count | 596 Count | 200 Count | 4.1 VDC | 0 VDC |
| 1778163496 | 187 Count | 536 Count | 183 Count | 4.1 VDC | 0 VDC |
| 1778161695 | 168 Count | 475 Count | 165 Count | 4.09 VDC | 0 VDC |
| 1778159894 | 118 Count | 337 Count | 116 Count | 4.1 VDC | 0 VDC |
| 1778158094 | 76 Count | 211 Count | 75 Count | 4.1 VDC | 0 VDC |
| 1778156293 | 46 Count | 120 Count | 46 Count | 4.09 VDC | 0 VDC |
| 1778154492 | 363 Count | 1065 Count | 348 Count | 4.1 VDC | 0 VDC |
| 1778152691 | 299 Count | 914 Count | 285 Count | 4.1 VDC | 0 VDC |
| 1778150890 | 267 Count | 818 Count | 254 Count | 4.1 VDC | 0 VDC |
| 1778149090 | 244 Count | 749 Count | 232 Count | 4.1 VDC | 0 VDC |
| 1778147297 | 220 Count | 683 Count | 213 Count | 4.09 VDC | 0 VDC |
| 1778145496 | 200 Count | 621 Count | 194 Count | 4.12 VDC | 0 VDC |
| 1778143696 | 182 Count | 559 Count | 177 Count | 4.08 VDC | 0 VDC |
| 1778141895 | 161 Count | 497 Count | 157 Count | 4.11 VDC | 0 VDC |
| 1778140094 | 127 Count | 413 Count | 124 Count | 4.12 VDC | 0 VDC |
| 1778138293 | 107 Count | 351 Count | 105 Count | 4.08 VDC | 0 VDC |
| 1778136493 | 85 Count | 281 Count | 84 Count | 4.09 VDC | 0 VDC |
| 1778134692 | 48 Count | 155 Count | 48 Count | 4.12 VDC | 0 VDC |
| 1778132891 | 356 Count | 1039 Count | 340 Count | 4.09 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)