This is the latest recevied telemetry packets stored in our database for station/object SZ1SV-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1778134203 | 24 Count | 59 Count | 19 Count | 0 VDC | 0 VDC |
| 1778133300 | 18 Count | 48 Count | 14 Count | 0 VDC | 0 VDC |
| 1778132397 | 15 Count | 41 Count | 12 Count | 0 VDC | 0 VDC |
| 1778131494 | 10 Count | 25 Count | 8 Count | 0 VDC | 0 VDC |
| 1778130591 | 4 Count | 13 Count | 3 Count | 0 VDC | 0 VDC |
| 1778129688 | 0 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1778046932 | 501 Count | 1016 Count | 413 Count | 0 VDC | 0 VDC |
| 1778046029 | 492 Count | 997 Count | 405 Count | 0 VDC | 0 VDC |
| 1778045126 | 474 Count | 969 Count | 388 Count | 0 VDC | 0 VDC |
| 1778044223 | 464 Count | 952 Count | 379 Count | 0 VDC | 0 VDC |
| 1778043319 | 458 Count | 941 Count | 374 Count | 0 VDC | 0 VDC |
| 1778042417 | 450 Count | 926 Count | 367 Count | 0 VDC | 0 VDC |
| 1778041513 | 447 Count | 912 Count | 365 Count | 0 VDC | 0 VDC |
| 1777989794 | 446 Count | 912 Count | 365 Count | 0 VDC | 0 VDC |
| 1777988891 | 440 Count | 897 Count | 360 Count | 0 VDC | 0 VDC |
| 1777987988 | 435 Count | 889 Count | 356 Count | 0 VDC | 0 VDC |
| 1777987084 | 429 Count | 877 Count | 351 Count | 0 VDC | 0 VDC |
| 1777986181 | 423 Count | 865 Count | 346 Count | 0 VDC | 0 VDC |
| 1777985278 | 417 Count | 854 Count | 341 Count | 0 VDC | 0 VDC |
| 1777984378 | 413 Count | 847 Count | 338 Count | 0 VDC | 0 VDC |
| 1777983472 | 409 Count | 836 Count | 335 Count | 0 VDC | 0 VDC |
| 1777983219 | 408 Count | 836 Count | 335 Count | 0 VDC | 0 VDC |
| 1777982314 | 404 Count | 822 Count | 332 Count | 0 VDC | 0 VDC |
| 1777981413 | 398 Count | 808 Count | 327 Count | 0 VDC | 0 VDC |
| 1777980508 | 391 Count | 796 Count | 321 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)