This is the latest recevied telemetry packets stored in our database for station/object SK3VJ-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1772708899 | 162 Count | 732 Count | 142 Count | 0 VDC | 0 VDC |
| 1772707096 | 156 Count | 712 Count | 137 Count | 0 VDC | 0 VDC |
| 1772705294 | 147 Count | 689 Count | 129 Count | 0 VDC | 0 VDC |
| 1772703487 | 141 Count | 658 Count | 124 Count | 0 VDC | 0 VDC |
| 1772701684 | 133 Count | 624 Count | 117 Count | 0 VDC | 0 VDC |
| 1772699881 | 123 Count | 590 Count | 108 Count | 0 VDC | 0 VDC |
| 1772698078 | 112 Count | 548 Count | 98 Count | 0 VDC | 0 VDC |
| 1772696275 | 100 Count | 510 Count | 87 Count | 0 VDC | 0 VDC |
| 1772694472 | 90 Count | 441 Count | 78 Count | 0 VDC | 0 VDC |
| 1772692703 | 77 Count | 391 Count | 70 Count | 0 VDC | 0 VDC |
| 1772690900 | 65 Count | 351 Count | 59 Count | 0 VDC | 0 VDC |
| 1772689097 | 56 Count | 316 Count | 51 Count | 0 VDC | 0 VDC |
| 1772685491 | 39 Count | 174 Count | 36 Count | 0 VDC | 0 VDC |
| 1772683688 | 29 Count | 127 Count | 27 Count | 0 VDC | 0 VDC |
| 1772681885 | 18 Count | 82 Count | 17 Count | 0 VDC | 0 VDC |
| 1772680082 | 9 Count | 41 Count | 9 Count | 0 VDC | 0 VDC |
| 1772678279 | 193 Count | 1014 Count | 161 Count | 0 VDC | 0 VDC |
| 1772676476 | 185 Count | 975 Count | 154 Count | 0 VDC | 0 VDC |
| 1772674673 | 176 Count | 927 Count | 146 Count | 0 VDC | 0 VDC |
| 1772672870 | 166 Count | 887 Count | 137 Count | 0 VDC | 0 VDC |
| 1772671100 | 154 Count | 848 Count | 130 Count | 0 VDC | 0 VDC |
| 1772669297 | 143 Count | 808 Count | 120 Count | 0 VDC | 0 VDC |
| 1772667494 | 135 Count | 771 Count | 113 Count | 0 VDC | 0 VDC |
| 1772665691 | 129 Count | 734 Count | 108 Count | 0 VDC | 0 VDC |
| 1772663888 | 121 Count | 702 Count | 101 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)