This is the latest recevied telemetry packets stored in our database for station/object SQ3KT-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1762141066 | 342 Count | 466 Count | 227 Count | 0 VDC | 0 VDC |
| 1762139266 | 337 Count | 461 Count | 223 Count | 0 VDC | 0 VDC |
| 1762137465 | 332 Count | 456 Count | 219 Count | 0 VDC | 0 VDC |
| 1762135664 | 327 Count | 451 Count | 215 Count | 0 VDC | 0 VDC |
| 1762133863 | 322 Count | 446 Count | 211 Count | 0 VDC | 0 VDC |
| 1762132063 | 317 Count | 441 Count | 207 Count | 0 VDC | 0 VDC |
| 1762130262 | 312 Count | 436 Count | 203 Count | 0 VDC | 0 VDC |
| 1762128461 | 307 Count | 431 Count | 199 Count | 0 VDC | 0 VDC |
| 1762126661 | 302 Count | 426 Count | 195 Count | 0 VDC | 0 VDC |
| 1762103266 | 231 Count | 284 Count | 145 Count | 0 VDC | 0 VDC |
| 1762101467 | 227 Count | 278 Count | 142 Count | 0 VDC | 0 VDC |
| 1762099664 | 222 Count | 273 Count | 138 Count | 0 VDC | 0 VDC |
| 1762097863 | 217 Count | 268 Count | 134 Count | 0 VDC | 0 VDC |
| 1762096063 | 212 Count | 263 Count | 130 Count | 0 VDC | 0 VDC |
| 1762094262 | 207 Count | 255 Count | 126 Count | 0 VDC | 0 VDC |
| 1762092461 | 202 Count | 243 Count | 122 Count | 0 VDC | 0 VDC |
| 1762088860 | 192 Count | 207 Count | 114 Count | 0 VDC | 0 VDC |
| 1762087060 | 187 Count | 195 Count | 110 Count | 0 VDC | 0 VDC |
| 1762085259 | 182 Count | 187 Count | 106 Count | 0 VDC | 0 VDC |
| 1762083458 | 178 Count | 183 Count | 103 Count | 0 VDC | 0 VDC |
| 1762081672 | 170 Count | 177 Count | 100 Count | 0 VDC | 0 VDC |
| 1762079871 | 165 Count | 172 Count | 96 Count | 0 VDC | 0 VDC |
| 1762078071 | 160 Count | 167 Count | 92 Count | 0 VDC | 0 VDC |
| 1762076270 | 155 Count | 162 Count | 88 Count | 0 VDC | 0 VDC |
| 1762074469 | 151 Count | 158 Count | 85 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)