This is the latest recevied telemetry packets stored in our database for station/object SR8ULZ-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1772476835 | 547 Count | 935 Count | 301 Count | 0 VDC | 0 VDC |
| 1772475034 | 545 Count | 933 Count | 300 Count | 0 VDC | 0 VDC |
| 1772473234 | 543 Count | 931 Count | 299 Count | 0 VDC | 0 VDC |
| 1772471433 | 541 Count | 929 Count | 298 Count | 0 VDC | 0 VDC |
| 1772469632 | 539 Count | 927 Count | 297 Count | 0 VDC | 0 VDC |
| 1772467832 | 537 Count | 925 Count | 296 Count | 0 VDC | 0 VDC |
| 1772466031 | 534 Count | 922 Count | 294 Count | 0 VDC | 0 VDC |
| 1772464230 | 532 Count | 920 Count | 293 Count | 0 VDC | 0 VDC |
| 1772462430 | 529 Count | 918 Count | 291 Count | 0 VDC | 0 VDC |
| 1772460629 | 527 Count | 916 Count | 290 Count | 0 VDC | 0 VDC |
| 1772458828 | 525 Count | 913 Count | 289 Count | 0 VDC | 0 VDC |
| 1772457028 | 523 Count | 910 Count | 288 Count | 0 VDC | 0 VDC |
| 1772455235 | 517 Count | 907 Count | 287 Count | 0 VDC | 0 VDC |
| 1772453433 | 515 Count | 905 Count | 286 Count | 0 VDC | 0 VDC |
| 1772451633 | 513 Count | 901 Count | 285 Count | 0 VDC | 0 VDC |
| 1772449832 | 511 Count | 897 Count | 284 Count | 0 VDC | 0 VDC |
| 1772448032 | 508 Count | 894 Count | 282 Count | 0 VDC | 0 VDC |
| 1772446231 | 506 Count | 892 Count | 281 Count | 0 VDC | 0 VDC |
| 1772444430 | 504 Count | 890 Count | 280 Count | 0 VDC | 0 VDC |
| 1772442629 | 502 Count | 888 Count | 279 Count | 0 VDC | 0 VDC |
| 1772440829 | 500 Count | 885 Count | 278 Count | 0 VDC | 0 VDC |
| 1772439028 | 497 Count | 881 Count | 276 Count | 0 VDC | 0 VDC |
| 1772437228 | 494 Count | 878 Count | 274 Count | 0 VDC | 0 VDC |
| 1772435427 | 492 Count | 875 Count | 273 Count | 0 VDC | 0 VDC |
| 1772433633 | 485 Count | 871 Count | 271 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)