This is the latest recevied telemetry packets stored in our database for station/object SP8HDC-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1766502179 | 252 Count | 918 Count | 232 Count | 0 VDC | 0 VDC |
| 1766500378 | 251 Count | 918 Count | 232 Count | 0 VDC | 0 VDC |
| 1766498578 | 250 Count | 918 Count | 232 Count | 0 VDC | 0 VDC |
| 1766496777 | 249 Count | 918 Count | 232 Count | 0 VDC | 0 VDC |
| 1766494976 | 246 Count | 909 Count | 230 Count | 0 VDC | 0 VDC |
| 1766493175 | 233 Count | 855 Count | 218 Count | 0 VDC | 0 VDC |
| 1766491375 | 199 Count | 776 Count | 185 Count | 0 VDC | 0 VDC |
| 1766489572 | 176 Count | 709 Count | 163 Count | 0 VDC | 0 VDC |
| 1766487772 | 164 Count | 658 Count | 152 Count | 0 VDC | 0 VDC |
| 1766485971 | 151 Count | 604 Count | 140 Count | 0 VDC | 0 VDC |
| 1766484170 | 138 Count | 550 Count | 128 Count | 0 VDC | 0 VDC |
| 1766482369 | 125 Count | 493 Count | 116 Count | 0 VDC | 0 VDC |
| 1766480577 | 113 Count | 449 Count | 105 Count | 0 VDC | 0 VDC |
| 1766478776 | 101 Count | 403 Count | 94 Count | 0 VDC | 0 VDC |
| 1766476975 | 89 Count | 351 Count | 83 Count | 0 VDC | 0 VDC |
| 1766475174 | 78 Count | 301 Count | 73 Count | 0 VDC | 0 VDC |
| 1766473374 | 66 Count | 251 Count | 62 Count | 0 VDC | 0 VDC |
| 1766471573 | 54 Count | 202 Count | 51 Count | 0 VDC | 0 VDC |
| 1766469772 | 40 Count | 152 Count | 38 Count | 0 VDC | 0 VDC |
| 1766467972 | 27 Count | 100 Count | 26 Count | 0 VDC | 0 VDC |
| 1766466171 | 13 Count | 52 Count | 13 Count | 0 VDC | 0 VDC |
| 1766464370 | 288 Count | 1017 Count | 271 Count | 0 VDC | 0 VDC |
| 1766462569 | 274 Count | 965 Count | 258 Count | 0 VDC | 0 VDC |
| 1766460769 | 259 Count | 911 Count | 244 Count | 0 VDC | 0 VDC |
| 1766458978 | 245 Count | 867 Count | 231 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)