This is the latest recevied telemetry packets stored in our database for station/object SQ3KT-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1762103000 | 162 Count | 612 Count | 99 Count | 0 VDC | 0 VDC |
| 1762102099 | 160 Count | 606 Count | 98 Count | 0 VDC | 0 VDC |
| 1762101199 | 158 Count | 584 Count | 97 Count | 0 VDC | 0 VDC |
| 1762100316 | 156 Count | 576 Count | 96 Count | 0 VDC | 0 VDC |
| 1762099415 | 153 Count | 555 Count | 94 Count | 0 VDC | 0 VDC |
| 1762098514 | 151 Count | 530 Count | 93 Count | 0 VDC | 0 VDC |
| 1762097614 | 148 Count | 522 Count | 91 Count | 0 VDC | 0 VDC |
| 1762096713 | 146 Count | 516 Count | 90 Count | 0 VDC | 0 VDC |
| 1762095812 | 143 Count | 501 Count | 88 Count | 0 VDC | 0 VDC |
| 1762094911 | 141 Count | 494 Count | 87 Count | 0 VDC | 0 VDC |
| 1762094011 | 138 Count | 485 Count | 85 Count | 0 VDC | 0 VDC |
| 1762093110 | 136 Count | 479 Count | 84 Count | 0 VDC | 0 VDC |
| 1762092209 | 133 Count | 470 Count | 82 Count | 0 VDC | 0 VDC |
| 1762091308 | 131 Count | 463 Count | 81 Count | 0 VDC | 0 VDC |
| 1762090408 | 129 Count | 440 Count | 80 Count | 0 VDC | 0 VDC |
| 1762089507 | 127 Count | 433 Count | 79 Count | 0 VDC | 0 VDC |
| 1762088606 | 124 Count | 424 Count | 77 Count | 0 VDC | 0 VDC |
| 1762087705 | 122 Count | 419 Count | 76 Count | 0 VDC | 0 VDC |
| 1762086805 | 119 Count | 411 Count | 74 Count | 0 VDC | 0 VDC |
| 1762085904 | 117 Count | 405 Count | 73 Count | 0 VDC | 0 VDC |
| 1762085003 | 114 Count | 396 Count | 71 Count | 0 VDC | 0 VDC |
| 1762084102 | 112 Count | 389 Count | 70 Count | 0 VDC | 0 VDC |
| 1762083202 | 105 Count | 373 Count | 64 Count | 0 VDC | 0 VDC |
| 1762082301 | 103 Count | 367 Count | 63 Count | 0 VDC | 0 VDC |
| 1762081400 | 101 Count | 360 Count | 62 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)