This is the latest recevied telemetry packets stored in our database for station/object SP9KKK-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1781221916 | 57 Count | 315 Count | 48 Count | 3.19 VDC | 0 VDC |
| 1781221015 | 56 Count | 315 Count | 48 Count | 3.2 VDC | 0 VDC |
| 1781220114 | 51 Count | 278 Count | 44 Count | 3.21 VDC | 0 VDC |
| 1781219213 | 49 Count | 270 Count | 43 Count | 3.21 VDC | 0 VDC |
| 1781218312 | 30 Count | 173 Count | 25 Count | 3.22 VDC | 0 VDC |
| 1781217411 | 11 Count | 48 Count | 8 Count | 3.23 VDC | 0 VDC |
| 1781216524 | 165 Count | 1006 Count | 154 Count | 3.23 VDC | 0 VDC |
| 1781215623 | 146 Count | 892 Count | 136 Count | 3.24 VDC | 0 VDC |
| 1781214722 | 137 Count | 860 Count | 128 Count | 3.26 VDC | 0 VDC |
| 1781213821 | 124 Count | 786 Count | 116 Count | 3.27 VDC | 0 VDC |
| 1781212920 | 108 Count | 694 Count | 101 Count | 3.28 VDC | 0 VDC |
| 1781212019 | 106 Count | 678 Count | 100 Count | 3.28 VDC | 0 VDC |
| 1781211119 | 83 Count | 524 Count | 78 Count | 3.29 VDC | 0 VDC |
| 1781210217 | 66 Count | 409 Count | 62 Count | 3.3 VDC | 0 VDC |
| 1781209316 | 64 Count | 402 Count | 61 Count | 3.3 VDC | 0 VDC |
| 1781208416 | 62 Count | 372 Count | 60 Count | 3.3 VDC | 0 VDC |
| 1781207515 | 47 Count | 275 Count | 46 Count | 3.31 VDC | 0 VDC |
| 1781206614 | 22 Count | 131 Count | 22 Count | 3.31 VDC | 0 VDC |
| 1781205713 | 184 Count | 1037 Count | 169 Count | 3.33 VDC | 0 VDC |
| 1781204812 | 158 Count | 914 Count | 144 Count | 3.33 VDC | 0 VDC |
| 1781203911 | 142 Count | 827 Count | 129 Count | 3.34 VDC | 0 VDC |
| 1781203010 | 140 Count | 825 Count | 129 Count | 3.34 VDC | 0 VDC |
| 1781202123 | 124 Count | 760 Count | 117 Count | 3.34 VDC | 0 VDC |
| 1781201222 | 111 Count | 645 Count | 105 Count | 3.34 VDC | 0 VDC |
| 1781200321 | 90 Count | 550 Count | 85 Count | 3.34 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)