This is the latest recevied telemetry packets stored in our database for station/object SQ5LTL-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1774258591 | 279 Count | 750 Count | 151 Count | 0 VDC | 0 VDC |
| 1774256790 | 277 Count | 746 Count | 150 Count | 0 VDC | 0 VDC |
| 1774254989 | 275 Count | 742 Count | 149 Count | 0 VDC | 0 VDC |
| 1774253188 | 273 Count | 738 Count | 148 Count | 0 VDC | 0 VDC |
| 1774251387 | 271 Count | 709 Count | 147 Count | 0 VDC | 0 VDC |
| 1774249586 | 253 Count | 636 Count | 130 Count | 0 VDC | 0 VDC |
| 1774247786 | 243 Count | 611 Count | 121 Count | 0 VDC | 0 VDC |
| 1774245995 | 241 Count | 605 Count | 120 Count | 0 VDC | 0 VDC |
| 1774244194 | 239 Count | 601 Count | 119 Count | 0 VDC | 0 VDC |
| 1774242393 | 237 Count | 596 Count | 118 Count | 0 VDC | 0 VDC |
| 1774240592 | 235 Count | 590 Count | 117 Count | 0 VDC | 0 VDC |
| 1774238791 | 233 Count | 585 Count | 116 Count | 0 VDC | 0 VDC |
| 1774236991 | 231 Count | 579 Count | 115 Count | 0 VDC | 0 VDC |
| 1774235189 | 229 Count | 575 Count | 114 Count | 0 VDC | 0 VDC |
| 1774233389 | 227 Count | 570 Count | 113 Count | 0 VDC | 0 VDC |
| 1774231588 | 225 Count | 564 Count | 112 Count | 0 VDC | 0 VDC |
| 1774229787 | 223 Count | 559 Count | 111 Count | 0 VDC | 0 VDC |
| 1774227986 | 221 Count | 547 Count | 110 Count | 0 VDC | 0 VDC |
| 1774226185 | 219 Count | 542 Count | 109 Count | 0 VDC | 0 VDC |
| 1774224396 | 217 Count | 537 Count | 108 Count | 0 VDC | 0 VDC |
| 1774222594 | 215 Count | 532 Count | 107 Count | 0 VDC | 0 VDC |
| 1774220794 | 213 Count | 528 Count | 106 Count | 0 VDC | 0 VDC |
| 1774218993 | 211 Count | 523 Count | 105 Count | 0 VDC | 0 VDC |
| 1774217192 | 209 Count | 518 Count | 104 Count | 0 VDC | 0 VDC |
| 1774215391 | 207 Count | 514 Count | 103 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)