This is the latest recevied telemetry packets stored in our database for station/object N7723V. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Battery* | Temp* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1760925139 | 391 Volts | 641 Deg.F | 0 | 0 | 0 |
1760925080 | 399 Volts | 640 Deg.F | 0 | 0 | 0 |
1760925020 | 394 Volts | 639 Deg.F | 0 | 0 | 0 |
1760924944 | 399 Volts | 638 Deg.F | 0 | 0 | 0 |
1760924893 | 393 Volts | 637 Deg.F | 0 | 0 | 0 |
1760924826 | 407 Volts | 637 Deg.F | 0 | 0 | 0 |
1760924766 | 411 Volts | 633 Deg.F | 0 | 0 | 0 |
1760924759 | 414 Volts | 632 Deg.F | 0 | 0 | 0 |
1760924752 | 403 Volts | 632 Deg.F | 0 | 0 | 0 |
1760924745 | 407 Volts | 632 Deg.F | 0 | 0 | 0 |
1760924738 | 405 Volts | 632 Deg.F | 0 | 0 | 0 |
1760924730 | 401 Volts | 632 Deg.F | 0 | 0 | 0 |
1760924699 | 457 Volts | 631 Deg.F | 0 | 0 | 0 |
1760924639 | 463 Volts | 631 Deg.F | 0 | 0 | 0 |
1760924586 | 478 Volts | 631 Deg.F | 0 | 0 | 0 |
1760924526 | 466 Volts | 630 Deg.F | 0 | 0 | 0 |
1760924466 | 459 Volts | 630 Deg.F | 0 | 0 | 0 |
1760924406 | 455 Volts | 630 Deg.F | 0 | 0 | 0 |
1760924347 | 458 Volts | 630 Deg.F | 0 | 0 | 0 |
1760924287 | 449 Volts | 630 Deg.F | 0 | 0 | 0 |
1760924227 | 469 Volts | 630 Deg.F | 0 | 0 | 0 |
1760924167 | 458 Volts | 630 Deg.F | 0 | 0 | 0 |
1760924108 | 473 Volts | 630 Deg.F | 0 | 0 | 0 |
1760924048 | 457 Volts | 630 Deg.F | 0 | 0 | 0 |
1760923988 | 475 Volts | 630 Deg.F | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 1, 0
Temp: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)