This is the latest recevied telemetry packets stored in our database for station/object PD1AQM-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1778133893 | 831 Count | 459 Count | 459 Count | 0 VDC | 0 VDC |
| 1778130328 | 824 Count | 454 Count | 454 Count | 0 VDC | 0 VDC |
| 1778128524 | 820 Count | 451 Count | 451 Count | 0 VDC | 0 VDC |
| 1778126721 | 817 Count | 449 Count | 449 Count | 0 VDC | 0 VDC |
| 1778124917 | 814 Count | 447 Count | 447 Count | 0 VDC | 0 VDC |
| 1778123114 | 811 Count | 445 Count | 445 Count | 0 VDC | 0 VDC |
| 1778121310 | 808 Count | 443 Count | 443 Count | 0 VDC | 0 VDC |
| 1778119507 | 803 Count | 439 Count | 439 Count | 0 VDC | 0 VDC |
| 1778108727 | 784 Count | 426 Count | 426 Count | 0 VDC | 0 VDC |
| 1778106924 | 781 Count | 424 Count | 424 Count | 0 VDC | 0 VDC |
| 1778105120 | 778 Count | 422 Count | 422 Count | 0 VDC | 0 VDC |
| 1778103316 | 775 Count | 420 Count | 420 Count | 0 VDC | 0 VDC |
| 1778101513 | 772 Count | 418 Count | 418 Count | 0 VDC | 0 VDC |
| 1778099709 | 768 Count | 415 Count | 415 Count | 0 VDC | 0 VDC |
| 1778097906 | 764 Count | 412 Count | 412 Count | 0 VDC | 0 VDC |
| 1778096102 | 761 Count | 410 Count | 410 Count | 0 VDC | 0 VDC |
| 1778094298 | 758 Count | 408 Count | 408 Count | 0 VDC | 0 VDC |
| 1778092495 | 755 Count | 406 Count | 406 Count | 0 VDC | 0 VDC |
| 1778090691 | 752 Count | 404 Count | 404 Count | 0 VDC | 0 VDC |
| 1778088888 | 747 Count | 400 Count | 400 Count | 0 VDC | 0 VDC |
| 1778087126 | 744 Count | 398 Count | 398 Count | 0 VDC | 0 VDC |
| 1778085323 | 741 Count | 396 Count | 396 Count | 0 VDC | 0 VDC |
| 1778083519 | 738 Count | 394 Count | 394 Count | 0 VDC | 0 VDC |
| 1778081716 | 735 Count | 392 Count | 392 Count | 0 VDC | 0 VDC |
| 1778079912 | 732 Count | 390 Count | 390 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)