This is the latest recevied telemetry packets stored in our database for station/object SP6RGZ-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1761218084 | 602 Count | 289 Count | 289 Count | 0 VDC | 0 VDC |
| 1761216283 | 600 Count | 288 Count | 288 Count | 0 VDC | 0 VDC |
| 1761214483 | 598 Count | 287 Count | 287 Count | 0 VDC | 0 VDC |
| 1761212682 | 596 Count | 286 Count | 286 Count | 0 VDC | 0 VDC |
| 1761210890 | 594 Count | 285 Count | 285 Count | 0 VDC | 0 VDC |
| 1761209089 | 592 Count | 284 Count | 284 Count | 0 VDC | 0 VDC |
| 1761207288 | 590 Count | 283 Count | 283 Count | 0 VDC | 0 VDC |
| 1761205488 | 588 Count | 282 Count | 282 Count | 0 VDC | 0 VDC |
| 1761203687 | 586 Count | 281 Count | 281 Count | 0 VDC | 0 VDC |
| 1761201886 | 584 Count | 280 Count | 280 Count | 0 VDC | 0 VDC |
| 1761200086 | 582 Count | 279 Count | 279 Count | 0 VDC | 0 VDC |
| 1761198285 | 580 Count | 278 Count | 278 Count | 0 VDC | 0 VDC |
| 1761196484 | 578 Count | 277 Count | 277 Count | 0 VDC | 0 VDC |
| 1761194683 | 576 Count | 276 Count | 276 Count | 0 VDC | 0 VDC |
| 1761192883 | 574 Count | 275 Count | 275 Count | 0 VDC | 0 VDC |
| 1761191082 | 572 Count | 274 Count | 274 Count | 0 VDC | 0 VDC |
| 1761189289 | 570 Count | 273 Count | 273 Count | 0 VDC | 0 VDC |
| 1761187488 | 568 Count | 272 Count | 272 Count | 0 VDC | 0 VDC |
| 1761185687 | 566 Count | 271 Count | 271 Count | 0 VDC | 0 VDC |
| 1761183887 | 564 Count | 270 Count | 270 Count | 0 VDC | 0 VDC |
| 1761182086 | 562 Count | 269 Count | 269 Count | 0 VDC | 0 VDC |
| 1761180285 | 560 Count | 268 Count | 268 Count | 0 VDC | 0 VDC |
| 1761178484 | 558 Count | 267 Count | 267 Count | 0 VDC | 0 VDC |
| 1761176684 | 556 Count | 266 Count | 266 Count | 0 VDC | 0 VDC |
| 1761174883 | 553 Count | 264 Count | 264 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)