This is the latest recevied telemetry packets stored in our database for station/object F5MIW-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1774430567 | 314 Count | 482 Count | 285 Count | 0 VDC | 0 VDC |
| 1774429663 | 301 Count | 463 Count | 273 Count | 0 VDC | 0 VDC |
| 1774428864 | 286 Count | 446 Count | 259 Count | 0 VDC | 0 VDC |
| 1774427960 | 274 Count | 431 Count | 248 Count | 0 VDC | 0 VDC |
| 1774427055 | 262 Count | 406 Count | 237 Count | 0 VDC | 0 VDC |
| 1774426151 | 248 Count | 384 Count | 224 Count | 0 VDC | 0 VDC |
| 1774425247 | 241 Count | 374 Count | 218 Count | 0 VDC | 0 VDC |
| 1774424342 | 238 Count | 368 Count | 216 Count | 0 VDC | 0 VDC |
| 1774423438 | 224 Count | 348 Count | 203 Count | 0 VDC | 0 VDC |
| 1774422537 | 220 Count | 340 Count | 200 Count | 0 VDC | 0 VDC |
| 1774421629 | 212 Count | 319 Count | 193 Count | 0 VDC | 0 VDC |
| 1774420725 | 204 Count | 306 Count | 186 Count | 0 VDC | 0 VDC |
| 1774419821 | 191 Count | 290 Count | 174 Count | 0 VDC | 0 VDC |
| 1774418917 | 177 Count | 248 Count | 161 Count | 0 VDC | 0 VDC |
| 1774418012 | 166 Count | 229 Count | 151 Count | 0 VDC | 0 VDC |
| 1774417108 | 156 Count | 216 Count | 142 Count | 0 VDC | 0 VDC |
| 1774416204 | 141 Count | 200 Count | 128 Count | 0 VDC | 0 VDC |
| 1774415299 | 131 Count | 186 Count | 119 Count | 0 VDC | 0 VDC |
| 1774414395 | 119 Count | 166 Count | 108 Count | 0 VDC | 0 VDC |
| 1774413491 | 109 Count | 153 Count | 99 Count | 0 VDC | 0 VDC |
| 1774412586 | 97 Count | 135 Count | 88 Count | 0 VDC | 0 VDC |
| 1774411682 | 87 Count | 119 Count | 79 Count | 0 VDC | 0 VDC |
| 1774410778 | 76 Count | 106 Count | 69 Count | 0 VDC | 0 VDC |
| 1774409874 | 68 Count | 94 Count | 62 Count | 0 VDC | 0 VDC |
| 1774408969 | 57 Count | 77 Count | 52 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)