This is the latest recevied telemetry packets stored in our database for station/object SP4HMU-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1774042677 | 948 Count | 965 Count | 530 Count | 0 VDC | 0 VDC |
| 1774042076 | 946 Count | 963 Count | 529 Count | 0 VDC | 0 VDC |
| 1774041476 | 943 Count | 961 Count | 527 Count | 0 VDC | 0 VDC |
| 1774040875 | 941 Count | 959 Count | 526 Count | 0 VDC | 0 VDC |
| 1774040274 | 939 Count | 957 Count | 525 Count | 0 VDC | 0 VDC |
| 1774039674 | 936 Count | 955 Count | 523 Count | 0 VDC | 0 VDC |
| 1774039073 | 934 Count | 953 Count | 522 Count | 0 VDC | 0 VDC |
| 1774038472 | 932 Count | 951 Count | 521 Count | 0 VDC | 0 VDC |
| 1774037872 | 925 Count | 945 Count | 515 Count | 0 VDC | 0 VDC |
| 1774037271 | 922 Count | 942 Count | 513 Count | 0 VDC | 0 VDC |
| 1774036670 | 920 Count | 940 Count | 512 Count | 0 VDC | 0 VDC |
| 1774036069 | 917 Count | 938 Count | 510 Count | 0 VDC | 0 VDC |
| 1774035469 | 915 Count | 936 Count | 509 Count | 0 VDC | 0 VDC |
| 1774034868 | 913 Count | 934 Count | 508 Count | 0 VDC | 0 VDC |
| 1774034267 | 910 Count | 932 Count | 506 Count | 0 VDC | 0 VDC |
| 1774033667 | 908 Count | 930 Count | 505 Count | 0 VDC | 0 VDC |
| 1774033066 | 906 Count | 928 Count | 504 Count | 0 VDC | 0 VDC |
| 1774032465 | 903 Count | 926 Count | 502 Count | 0 VDC | 0 VDC |
| 1774031865 | 901 Count | 924 Count | 501 Count | 0 VDC | 0 VDC |
| 1774031264 | 899 Count | 922 Count | 500 Count | 0 VDC | 0 VDC |
| 1774030664 | 896 Count | 920 Count | 498 Count | 0 VDC | 0 VDC |
| 1774030063 | 894 Count | 918 Count | 497 Count | 0 VDC | 0 VDC |
| 1774029462 | 892 Count | 916 Count | 496 Count | 0 VDC | 0 VDC |
| 1774028862 | 889 Count | 914 Count | 494 Count | 0 VDC | 0 VDC |
| 1774028261 | 887 Count | 912 Count | 493 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)