This is the latest recevied telemetry packets stored in our database for station/object SZ1SV-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1759534300 | 583 Count | 314 Count | 260 Count | 0.28 VDC | 0.14 VDC |
| 1759533694 | 581 Count | 313 Count | 259 Count | 0.28 VDC | 0.14 VDC |
| 1759533089 | 579 Count | 312 Count | 258 Count | 0.28 VDC | 0.14 VDC |
| 1759532484 | 578 Count | 312 Count | 258 Count | 0.28 VDC | 0.14 VDC |
| 1759531877 | 576 Count | 311 Count | 257 Count | 0.28 VDC | 0.14 VDC |
| 1759531268 | 574 Count | 310 Count | 256 Count | 0.28 VDC | 0.14 VDC |
| 1759530665 | 573 Count | 310 Count | 256 Count | 0.28 VDC | 0.14 VDC |
| 1759530057 | 571 Count | 309 Count | 255 Count | 0.28 VDC | 0.14 VDC |
| 1759529454 | 569 Count | 308 Count | 254 Count | 0.28 VDC | 0.14 VDC |
| 1759528850 | 568 Count | 308 Count | 254 Count | 0.28 VDC | 0.14 VDC |
| 1759528242 | 566 Count | 307 Count | 253 Count | 0.28 VDC | 0.14 VDC |
| 1759527637 | 564 Count | 306 Count | 252 Count | 0.28 VDC | 0.14 VDC |
| 1759527028 | 563 Count | 306 Count | 252 Count | 0.28 VDC | 0.14 VDC |
| 1759526422 | 561 Count | 305 Count | 251 Count | 0.28 VDC | 0.14 VDC |
| 1759525819 | 559 Count | 304 Count | 250 Count | 0.28 VDC | 0.14 VDC |
| 1759525210 | 558 Count | 304 Count | 250 Count | 0.28 VDC | 0.14 VDC |
| 1759524607 | 556 Count | 303 Count | 249 Count | 0.28 VDC | 0.14 VDC |
| 1759524001 | 554 Count | 302 Count | 248 Count | 0.28 VDC | 0.14 VDC |
| 1759523398 | 553 Count | 302 Count | 248 Count | 0.28 VDC | 0.14 VDC |
| 1759522790 | 551 Count | 301 Count | 247 Count | 0.28 VDC | 0.14 VDC |
| 1759522184 | 549 Count | 300 Count | 246 Count | 0.28 VDC | 0.14 VDC |
| 1759521575 | 548 Count | 300 Count | 246 Count | 0.28 VDC | 0.14 VDC |
| 1759520973 | 545 Count | 298 Count | 244 Count | 0.28 VDC | 0.14 VDC |
| 1759520364 | 543 Count | 297 Count | 243 Count | 0.28 VDC | 0.14 VDC |
| 1759519761 | 542 Count | 297 Count | 243 Count | 0.28 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)