This is the latest recevied telemetry packets stored in our database for station/object SP6NIP-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1763570862 | 570 Count | 722 Count | 251 Count | 0 VDC | 0 VDC |
| 1763569061 | 563 Count | 706 Count | 246 Count | 0 VDC | 0 VDC |
| 1763567259 | 556 Count | 695 Count | 241 Count | 0 VDC | 0 VDC |
| 1763565458 | 550 Count | 685 Count | 237 Count | 0 VDC | 0 VDC |
| 1763563656 | 543 Count | 658 Count | 232 Count | 0 VDC | 0 VDC |
| 1763561854 | 536 Count | 640 Count | 227 Count | 0 VDC | 0 VDC |
| 1763560053 | 530 Count | 612 Count | 223 Count | 0 VDC | 0 VDC |
| 1763558252 | 525 Count | 604 Count | 220 Count | 0 VDC | 0 VDC |
| 1763556450 | 519 Count | 594 Count | 216 Count | 0 VDC | 0 VDC |
| 1763554649 | 513 Count | 585 Count | 212 Count | 0 VDC | 0 VDC |
| 1763549852 | 496 Count | 561 Count | 201 Count | 0 VDC | 0 VDC |
| 1763548050 | 490 Count | 553 Count | 197 Count | 0 VDC | 0 VDC |
| 1763546249 | 483 Count | 545 Count | 192 Count | 0 VDC | 0 VDC |
| 1763544446 | 476 Count | 535 Count | 187 Count | 0 VDC | 0 VDC |
| 1763542644 | 468 Count | 520 Count | 181 Count | 0 VDC | 0 VDC |
| 1763540843 | 459 Count | 507 Count | 174 Count | 0 VDC | 0 VDC |
| 1763539063 | 451 Count | 492 Count | 168 Count | 0 VDC | 0 VDC |
| 1763537239 | 443 Count | 480 Count | 162 Count | 0 VDC | 0 VDC |
| 1763535437 | 434 Count | 463 Count | 155 Count | 0 VDC | 0 VDC |
| 1763533636 | 424 Count | 446 Count | 147 Count | 0 VDC | 0 VDC |
| 1763531834 | 414 Count | 430 Count | 139 Count | 0 VDC | 0 VDC |
| 1763530034 | 407 Count | 402 Count | 134 Count | 0 VDC | 0 VDC |
| 1763527650 | 394 Count | 383 Count | 123 Count | 0 VDC | 0 VDC |
| 1763525849 | 385 Count | 365 Count | 116 Count | 0 VDC | 0 VDC |
| 1763524048 | 374 Count | 345 Count | 107 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)