This is the latest recevied telemetry packets stored in our database for station/object CT2GRF-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1772480138 | 838 Count | 975 Count | 676 Count | 4.23 VDC | 0.14 VDC |
| 1772479232 | 833 Count | 970 Count | 672 Count | 4.22 VDC | 0.14 VDC |
| 1772478327 | 829 Count | 965 Count | 669 Count | 4.23 VDC | 0.14 VDC |
| 1772477422 | 827 Count | 962 Count | 668 Count | 4.22 VDC | 0.14 VDC |
| 1772476517 | 821 Count | 956 Count | 663 Count | 4.23 VDC | 0.14 VDC |
| 1772475612 | 817 Count | 950 Count | 660 Count | 4.21 VDC | 0.14 VDC |
| 1772474707 | 811 Count | 943 Count | 655 Count | 4.22 VDC | 0.14 VDC |
| 1772473801 | 806 Count | 936 Count | 651 Count | 4.25 VDC | 0.14 VDC |
| 1772472893 | 800 Count | 931 Count | 646 Count | 4.21 VDC | 0.14 VDC |
| 1772471988 | 793 Count | 921 Count | 640 Count | 4.21 VDC | 0.14 VDC |
| 1772471210 | 789 Count | 917 Count | 637 Count | 4.23 VDC | 0.14 VDC |
| 1772470304 | 783 Count | 912 Count | 632 Count | 4.24 VDC | 0.14 VDC |
| 1772469399 | 778 Count | 907 Count | 628 Count | 4.24 VDC | 0.14 VDC |
| 1772468494 | 771 Count | 899 Count | 622 Count | 4.22 VDC | 0.14 VDC |
| 1772467589 | 767 Count | 896 Count | 619 Count | 4.24 VDC | 0.14 VDC |
| 1772466684 | 763 Count | 891 Count | 616 Count | 4.24 VDC | 0.14 VDC |
| 1772465778 | 758 Count | 885 Count | 612 Count | 4.2 VDC | 0.14 VDC |
| 1772464873 | 753 Count | 879 Count | 608 Count | 4.22 VDC | 0.14 VDC |
| 1772463968 | 745 Count | 871 Count | 601 Count | 4.24 VDC | 0.14 VDC |
| 1772463063 | 740 Count | 865 Count | 597 Count | 4.24 VDC | 0.14 VDC |
| 1772462158 | 736 Count | 860 Count | 594 Count | 4.2 VDC | 0.14 VDC |
| 1772461252 | 733 Count | 854 Count | 592 Count | 4.23 VDC | 0.14 VDC |
| 1772460347 | 726 Count | 847 Count | 586 Count | 4.23 VDC | 0.14 VDC |
| 1772459442 | 719 Count | 838 Count | 580 Count | 4.2 VDC | 0.14 VDC |
| 1772458537 | 711 Count | 830 Count | 573 Count | 4.23 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)