This is the latest recevied telemetry packets stored in our database for station/object SQ9IDT-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1777737622 | 155 Count | 764 Count | 148 Count | 0 VDC | 0 VDC |
| 1777735822 | 135 Count | 673 Count | 129 Count | 0 VDC | 0 VDC |
| 1777734021 | 115 Count | 582 Count | 110 Count | 0 VDC | 0 VDC |
| 1777732220 | 97 Count | 499 Count | 93 Count | 0 VDC | 0 VDC |
| 1777730419 | 77 Count | 367 Count | 74 Count | 0 VDC | 0 VDC |
| 1777728618 | 57 Count | 271 Count | 55 Count | 0 VDC | 0 VDC |
| 1777726818 | 39 Count | 166 Count | 38 Count | 0 VDC | 0 VDC |
| 1777725017 | 20 Count | 88 Count | 20 Count | 0 VDC | 0 VDC |
| 1777723216 | 231 Count | 1077 Count | 215 Count | 0 VDC | 0 VDC |
| 1777721416 | 212 Count | 984 Count | 197 Count | 0 VDC | 0 VDC |
| 1777719615 | 190 Count | 897 Count | 178 Count | 0 VDC | 0 VDC |
| 1777716014 | 152 Count | 689 Count | 142 Count | 0 VDC | 0 VDC |
| 1777712413 | 110 Count | 512 Count | 103 Count | 0 VDC | 0 VDC |
| 1777710612 | 83 Count | 403 Count | 77 Count | 0 VDC | 0 VDC |
| 1777708811 | 63 Count | 297 Count | 58 Count | 0 VDC | 0 VDC |
| 1777707011 | 42 Count | 206 Count | 39 Count | 0 VDC | 0 VDC |
| 1777705210 | 21 Count | 117 Count | 19 Count | 0 VDC | 0 VDC |
| 1777703410 | 212 Count | 1005 Count | 193 Count | 0 VDC | 0 VDC |
| 1777701611 | 188 Count | 878 Count | 173 Count | 0 VDC | 0 VDC |
| 1777699808 | 165 Count | 763 Count | 151 Count | 0 VDC | 0 VDC |
| 1777698008 | 148 Count | 676 Count | 135 Count | 0 VDC | 0 VDC |
| 1777696207 | 129 Count | 568 Count | 117 Count | 0 VDC | 0 VDC |
| 1777694423 | 103 Count | 461 Count | 97 Count | 0 VDC | 0 VDC |
| 1777692623 | 82 Count | 363 Count | 77 Count | 0 VDC | 0 VDC |
| 1777689020 | 41 Count | 193 Count | 39 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)