This is the latest recevied telemetry packets stored in our database for station/object VK3XEM-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1768551587 | 617 Count | 223 Count | 114 Count | 0 VDC | 0 VDC |
| 1768550682 | 616 Count | 223 Count | 114 Count | 0 VDC | 0 VDC |
| 1768549778 | 615 Count | 223 Count | 114 Count | 0 VDC | 0 VDC |
| 1768548874 | 614 Count | 223 Count | 114 Count | 0 VDC | 0 VDC |
| 1768547969 | 613 Count | 223 Count | 114 Count | 0 VDC | 0 VDC |
| 1768547065 | 612 Count | 223 Count | 114 Count | 0 VDC | 0 VDC |
| 1768546161 | 611 Count | 223 Count | 114 Count | 0 VDC | 0 VDC |
| 1768545257 | 610 Count | 223 Count | 114 Count | 0 VDC | 0 VDC |
| 1768544352 | 609 Count | 223 Count | 114 Count | 0 VDC | 0 VDC |
| 1768543448 | 608 Count | 223 Count | 114 Count | 0 VDC | 0 VDC |
| 1768542543 | 607 Count | 223 Count | 114 Count | 0 VDC | 0 VDC |
| 1768541639 | 606 Count | 223 Count | 114 Count | 0 VDC | 0 VDC |
| 1768540734 | 605 Count | 223 Count | 114 Count | 0 VDC | 0 VDC |
| 1768539829 | 602 Count | 221 Count | 112 Count | 0 VDC | 0 VDC |
| 1768538924 | 589 Count | 209 Count | 100 Count | 0 VDC | 0 VDC |
| 1768538020 | 588 Count | 209 Count | 100 Count | 0 VDC | 0 VDC |
| 1768537116 | 587 Count | 209 Count | 100 Count | 0 VDC | 0 VDC |
| 1768536316 | 586 Count | 209 Count | 100 Count | 0 VDC | 0 VDC |
| 1768535411 | 585 Count | 209 Count | 100 Count | 0 VDC | 0 VDC |
| 1768534507 | 584 Count | 209 Count | 100 Count | 0 VDC | 0 VDC |
| 1768533603 | 583 Count | 209 Count | 100 Count | 0 VDC | 0 VDC |
| 1768532698 | 582 Count | 209 Count | 100 Count | 0 VDC | 0 VDC |
| 1768531794 | 581 Count | 209 Count | 100 Count | 0 VDC | 0 VDC |
| 1768530889 | 580 Count | 209 Count | 100 Count | 0 VDC | 0 VDC |
| 1768529984 | 579 Count | 209 Count | 100 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)