This is the latest recevied telemetry packets stored in our database for station/object 9W8ASH-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1782630366 | 324 Count | 739 Count | 323 Count | 0 VDC | 0 VDC |
| 1782623174 | 149 Count | 358 Count | 149 Count | 0 VDC | 0 VDC |
| 1782615974 | 400 Count | 1071 Count | 398 Count | 0 VDC | 0 VDC |
| 1782608767 | 298 Count | 698 Count | 297 Count | 0 VDC | 0 VDC |
| 1782601573 | 107 Count | 231 Count | 107 Count | 0 VDC | 0 VDC |
| 1782594369 | 591 Count | 1162 Count | 587 Count | 0 VDC | 0 VDC |
| 1782587165 | 480 Count | 971 Count | 477 Count | 0 VDC | 0 VDC |
| 1782579972 | 357 Count | 781 Count | 355 Count | 0 VDC | 0 VDC |
| 1782572768 | 239 Count | 527 Count | 238 Count | 0 VDC | 0 VDC |
| 1782565568 | 90 Count | 244 Count | 90 Count | 0 VDC | 0 VDC |
| 1782558371 | 534 Count | 1294 Count | 531 Count | 0 VDC | 0 VDC |
| 1782551167 | 414 Count | 965 Count | 412 Count | 0 VDC | 0 VDC |
| 1782543964 | 284 Count | 674 Count | 283 Count | 0 VDC | 0 VDC |
| 1782536773 | 172 Count | 403 Count | 172 Count | 0 VDC | 0 VDC |
| 1782529571 | 603 Count | 1250 Count | 598 Count | 0 VDC | 0 VDC |
| 1782522363 | 501 Count | 947 Count | 497 Count | 0 VDC | 0 VDC |
| 1782515183 | 366 Count | 652 Count | 363 Count | 0 VDC | 0 VDC |
| 1782507983 | 269 Count | 483 Count | 267 Count | 0 VDC | 0 VDC |
| 1782500774 | 180 Count | 324 Count | 179 Count | 0 VDC | 0 VDC |
| 1782493573 | 90 Count | 162 Count | 90 Count | 0 VDC | 0 VDC |
| 1782486366 | 425 Count | 1180 Count | 421 Count | 0 VDC | 0 VDC |
| 1782479162 | 324 Count | 934 Count | 321 Count | 0 VDC | 0 VDC |
| 1782471972 | 230 Count | 701 Count | 228 Count | 0 VDC | 0 VDC |
| 1782464768 | 134 Count | 404 Count | 133 Count | 0 VDC | 0 VDC |
| 1782457565 | 0 Count | 1 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)