This is the latest recevied telemetry packets stored in our database for station/object SR2ST-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1756693118 | 973 Count | 940 Count | 940 Count | 0 VDC | 0 VDC |
| 1756691437 | 924 Count | 892 Count | 892 Count | 0 VDC | 0 VDC |
| 1756689756 | 897 Count | 866 Count | 866 Count | 0 VDC | 0 VDC |
| 1756688075 | 865 Count | 835 Count | 835 Count | 0 VDC | 0 VDC |
| 1756686394 | 828 Count | 799 Count | 799 Count | 0 VDC | 0 VDC |
| 1756684713 | 788 Count | 760 Count | 760 Count | 0 VDC | 0 VDC |
| 1756683032 | 747 Count | 720 Count | 720 Count | 0 VDC | 0 VDC |
| 1756681351 | 704 Count | 678 Count | 678 Count | 0 VDC | 0 VDC |
| 1756679670 | 673 Count | 648 Count | 648 Count | 0 VDC | 0 VDC |
| 1756676308 | 593 Count | 570 Count | 570 Count | 0 VDC | 0 VDC |
| 1756674627 | 570 Count | 548 Count | 548 Count | 0 VDC | 0 VDC |
| 1756672946 | 533 Count | 512 Count | 512 Count | 0 VDC | 0 VDC |
| 1756671518 | 486 Count | 470 Count | 470 Count | 0 VDC | 0 VDC |
| 1756669837 | 448 Count | 433 Count | 433 Count | 0 VDC | 0 VDC |
| 1756668155 | 396 Count | 382 Count | 382 Count | 0 VDC | 0 VDC |
| 1756663112 | 268 Count | 257 Count | 257 Count | 0 VDC | 0 VDC |
| 1756661431 | 252 Count | 242 Count | 242 Count | 0 VDC | 0 VDC |
| 1756659750 | 219 Count | 210 Count | 210 Count | 0 VDC | 0 VDC |
| 1756658069 | 173 Count | 165 Count | 165 Count | 0 VDC | 0 VDC |
| 1756656388 | 154 Count | 147 Count | 147 Count | 0 VDC | 0 VDC |
| 1756654707 | 122 Count | 116 Count | 116 Count | 0 VDC | 0 VDC |
| 1756653026 | 102 Count | 97 Count | 97 Count | 0 VDC | 0 VDC |
| 1756651345 | 49 Count | 45 Count | 45 Count | 0 VDC | 0 VDC |
| 1756649916 | 1038 Count | 1001 Count | 1001 Count | 0 VDC | 0 VDC |
| 1756648235 | 995 Count | 959 Count | 959 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)