This is the latest recevied telemetry packets stored in our database for station/object SQ4HSE-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1782631486 | 412 Count | 763 Count | 137 Count | 4.13 VDC | 0 VDC |
| 1782629681 | 407 Count | 758 Count | 133 Count | 4.13 VDC | 0 VDC |
| 1782627881 | 403 Count | 751 Count | 130 Count | 4.13 VDC | 0 VDC |
| 1782626079 | 400 Count | 735 Count | 128 Count | 4.13 VDC | 0 VDC |
| 1782624279 | 397 Count | 726 Count | 126 Count | 4.12 VDC | 0 VDC |
| 1782622478 | 393 Count | 713 Count | 123 Count | 4.12 VDC | 0 VDC |
| 1782620681 | 391 Count | 707 Count | 122 Count | 4.12 VDC | 0 VDC |
| 1782618880 | 390 Count | 702 Count | 122 Count | 4.12 VDC | 0 VDC |
| 1782617080 | 389 Count | 699 Count | 122 Count | 4.12 VDC | 0 VDC |
| 1782615279 | 387 Count | 695 Count | 121 Count | 4.12 VDC | 0 VDC |
| 1782613478 | 386 Count | 692 Count | 121 Count | 4.12 VDC | 0 VDC |
| 1782611677 | 385 Count | 689 Count | 121 Count | 4.12 VDC | 0 VDC |
| 1782609877 | 384 Count | 686 Count | 121 Count | 4.12 VDC | 0 VDC |
| 1782608076 | 382 Count | 682 Count | 120 Count | 4.12 VDC | 0 VDC |
| 1782606276 | 381 Count | 679 Count | 120 Count | 4.12 VDC | 0 VDC |
| 1782604475 | 380 Count | 678 Count | 120 Count | 4.12 VDC | 0 VDC |
| 1782602674 | 379 Count | 676 Count | 120 Count | 4.12 VDC | 0 VDC |
| 1782600874 | 377 Count | 673 Count | 119 Count | 4.12 VDC | 0 VDC |
| 1782599073 | 376 Count | 670 Count | 119 Count | 4.12 VDC | 0 VDC |
| 1782597272 | 375 Count | 669 Count | 119 Count | 4.12 VDC | 0 VDC |
| 1782595472 | 374 Count | 668 Count | 119 Count | 4.12 VDC | 0 VDC |
| 1782593671 | 372 Count | 666 Count | 118 Count | 4.12 VDC | 0 VDC |
| 1782591870 | 371 Count | 665 Count | 118 Count | 4.12 VDC | 0 VDC |
| 1782590070 | 370 Count | 664 Count | 118 Count | 4.12 VDC | 0 VDC |
| 1782588269 | 369 Count | 663 Count | 118 Count | 4.12 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)