This is the latest recevied telemetry packets stored in our database for station/object SQ4HSE-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1774208939 | 86 Count | 978 Count | 64 Count | 0 VDC | 0 VDC |
| 1774205338 | 79 Count | 924 Count | 58 Count | 0 VDC | 0 VDC |
| 1774201737 | 76 Count | 880 Count | 56 Count | 0 VDC | 0 VDC |
| 1774198136 | 72 Count | 835 Count | 53 Count | 0 VDC | 0 VDC |
| 1774194535 | 69 Count | 787 Count | 51 Count | 0 VDC | 0 VDC |
| 1774190934 | 65 Count | 742 Count | 48 Count | 0 VDC | 0 VDC |
| 1774187332 | 62 Count | 736 Count | 46 Count | 0 VDC | 0 VDC |
| 1774183732 | 58 Count | 729 Count | 43 Count | 0 VDC | 0 VDC |
| 1774180131 | 55 Count | 686 Count | 41 Count | 0 VDC | 0 VDC |
| 1774176530 | 51 Count | 631 Count | 38 Count | 0 VDC | 0 VDC |
| 1774172928 | 48 Count | 586 Count | 36 Count | 0 VDC | 0 VDC |
| 1774169327 | 41 Count | 536 Count | 30 Count | 0 VDC | 0 VDC |
| 1774165727 | 38 Count | 490 Count | 28 Count | 0 VDC | 0 VDC |
| 1774162125 | 34 Count | 445 Count | 25 Count | 0 VDC | 0 VDC |
| 1774158524 | 31 Count | 402 Count | 23 Count | 0 VDC | 0 VDC |
| 1774154996 | 27 Count | 358 Count | 20 Count | 0 VDC | 0 VDC |
| 1774151395 | 24 Count | 314 Count | 18 Count | 0 VDC | 0 VDC |
| 1774147794 | 20 Count | 266 Count | 15 Count | 0 VDC | 0 VDC |
| 1774144193 | 17 Count | 221 Count | 13 Count | 0 VDC | 0 VDC |
| 1774140593 | 13 Count | 177 Count | 10 Count | 0 VDC | 0 VDC |
| 1774136992 | 10 Count | 135 Count | 8 Count | 0 VDC | 0 VDC |
| 1774133391 | 6 Count | 91 Count | 5 Count | 0 VDC | 0 VDC |
| 1774129790 | 3 Count | 45 Count | 3 Count | 0 VDC | 0 VDC |
| 1774126189 | 79 Count | 1005 Count | 57 Count | 0 VDC | 0 VDC |
| 1774122588 | 76 Count | 961 Count | 55 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)