This is the latest recevied telemetry packets stored in our database for station/object SP5MSV-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1768514518 | 299 Count | 437 Count | 60 Count | 0 VDC | 0 VDC |
| 1768512717 | 297 Count | 424 Count | 59 Count | 0 VDC | 0 VDC |
| 1768510916 | 296 Count | 412 Count | 59 Count | 0 VDC | 0 VDC |
| 1768509116 | 293 Count | 401 Count | 57 Count | 0 VDC | 0 VDC |
| 1768507324 | 291 Count | 392 Count | 56 Count | 0 VDC | 0 VDC |
| 1768505523 | 290 Count | 385 Count | 56 Count | 0 VDC | 0 VDC |
| 1768503723 | 287 Count | 381 Count | 54 Count | 0 VDC | 0 VDC |
| 1768501922 | 286 Count | 378 Count | 54 Count | 0 VDC | 0 VDC |
| 1768500121 | 284 Count | 375 Count | 53 Count | 0 VDC | 0 VDC |
| 1768498321 | 283 Count | 373 Count | 53 Count | 0 VDC | 0 VDC |
| 1768496520 | 282 Count | 373 Count | 53 Count | 0 VDC | 0 VDC |
| 1768494719 | 281 Count | 373 Count | 53 Count | 0 VDC | 0 VDC |
| 1768492919 | 279 Count | 365 Count | 52 Count | 0 VDC | 0 VDC |
| 1768491118 | 278 Count | 361 Count | 52 Count | 0 VDC | 0 VDC |
| 1768489317 | 277 Count | 355 Count | 52 Count | 0 VDC | 0 VDC |
| 1768487516 | 276 Count | 353 Count | 52 Count | 0 VDC | 0 VDC |
| 1768485724 | 274 Count | 351 Count | 51 Count | 0 VDC | 0 VDC |
| 1768483922 | 272 Count | 346 Count | 50 Count | 0 VDC | 0 VDC |
| 1768482121 | 271 Count | 345 Count | 50 Count | 0 VDC | 0 VDC |
| 1768480320 | 269 Count | 340 Count | 49 Count | 0 VDC | 0 VDC |
| 1768478520 | 267 Count | 332 Count | 48 Count | 0 VDC | 0 VDC |
| 1768476719 | 266 Count | 331 Count | 48 Count | 0 VDC | 0 VDC |
| 1768474918 | 265 Count | 331 Count | 48 Count | 0 VDC | 0 VDC |
| 1768473118 | 264 Count | 331 Count | 48 Count | 0 VDC | 0 VDC |
| 1768471317 | 263 Count | 331 Count | 48 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)