This is the latest recevied telemetry packets stored in our database for station/object IW9GTR-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1763382643 | 36 Count | 101 Count | 32 Count | 0 VDC | 0 VDC |
| 1763381439 | 23 Count | 62 Count | 21 Count | 0 VDC | 0 VDC |
| 1763380226 | 10 Count | 17 Count | 10 Count | 0 VDC | 0 VDC |
| 1763379017 | 308 Count | 997 Count | 251 Count | 0 VDC | 0 VDC |
| 1763378902 | 307 Count | 997 Count | 251 Count | 0 VDC | 0 VDC |
| 1763377693 | 301 Count | 965 Count | 247 Count | 0 VDC | 0 VDC |
| 1763376484 | 287 Count | 918 Count | 235 Count | 0 VDC | 0 VDC |
| 1763375275 | 267 Count | 876 Count | 217 Count | 0 VDC | 0 VDC |
| 1763374066 | 261 Count | 842 Count | 213 Count | 0 VDC | 0 VDC |
| 1763372857 | 253 Count | 810 Count | 207 Count | 0 VDC | 0 VDC |
| 1763371648 | 244 Count | 781 Count | 200 Count | 0 VDC | 0 VDC |
| 1763370439 | 235 Count | 742 Count | 193 Count | 0 VDC | 0 VDC |
| 1763369230 | 226 Count | 711 Count | 186 Count | 0 VDC | 0 VDC |
| 1763368021 | 218 Count | 678 Count | 180 Count | 0 VDC | 0 VDC |
| 1763366812 | 205 Count | 641 Count | 169 Count | 0 VDC | 0 VDC |
| 1763366585 | 204 Count | 641 Count | 169 Count | 0 VDC | 0 VDC |
| 1763365377 | 198 Count | 611 Count | 165 Count | 0 VDC | 0 VDC |
| 1763364168 | 187 Count | 578 Count | 156 Count | 0 VDC | 0 VDC |
| 1763362959 | 163 Count | 530 Count | 134 Count | 0 VDC | 0 VDC |
| 1763361750 | 149 Count | 493 Count | 122 Count | 0 VDC | 0 VDC |
| 1763360541 | 135 Count | 460 Count | 110 Count | 0 VDC | 0 VDC |
| 1763359331 | 109 Count | 412 Count | 86 Count | 0 VDC | 0 VDC |
| 1763358122 | 100 Count | 381 Count | 79 Count | 0 VDC | 0 VDC |
| 1763356913 | 91 Count | 343 Count | 72 Count | 0 VDC | 0 VDC |
| 1763355705 | 82 Count | 307 Count | 65 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)