This is the latest recevied telemetry packets stored in our database for station/object SQ2SIX-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1763501108 | 0 Count | 879 Count | 0 Count | 0 VDC | 0 VDC |
| 1763500508 | 0 Count | 861 Count | 0 Count | 0 VDC | 0 VDC |
| 1763499908 | 0 Count | 844 Count | 0 Count | 0 VDC | 0 VDC |
| 1763499308 | 0 Count | 826 Count | 0 Count | 0 VDC | 0 VDC |
| 1763498710 | 0 Count | 807 Count | 0 Count | 0 VDC | 0 VDC |
| 1763498110 | 0 Count | 791 Count | 0 Count | 0 VDC | 0 VDC |
| 1763497510 | 0 Count | 782 Count | 0 Count | 0 VDC | 0 VDC |
| 1763496910 | 0 Count | 761 Count | 0 Count | 0 VDC | 0 VDC |
| 1763496310 | 0 Count | 748 Count | 0 Count | 0 VDC | 0 VDC |
| 1763495710 | 0 Count | 734 Count | 0 Count | 0 VDC | 0 VDC |
| 1763495109 | 0 Count | 716 Count | 0 Count | 0 VDC | 0 VDC |
| 1763494509 | 0 Count | 704 Count | 0 Count | 0 VDC | 0 VDC |
| 1763493909 | 0 Count | 687 Count | 0 Count | 0 VDC | 0 VDC |
| 1763493309 | 0 Count | 662 Count | 0 Count | 0 VDC | 0 VDC |
| 1763492709 | 0 Count | 645 Count | 0 Count | 0 VDC | 0 VDC |
| 1763492109 | 0 Count | 629 Count | 0 Count | 0 VDC | 0 VDC |
| 1763491509 | 0 Count | 600 Count | 0 Count | 0 VDC | 0 VDC |
| 1763490909 | 0 Count | 580 Count | 0 Count | 0 VDC | 0 VDC |
| 1763490309 | 0 Count | 565 Count | 0 Count | 0 VDC | 0 VDC |
| 1763489709 | 0 Count | 546 Count | 0 Count | 0 VDC | 0 VDC |
| 1763489109 | 0 Count | 526 Count | 0 Count | 0 VDC | 0 VDC |
| 1763488509 | 0 Count | 509 Count | 0 Count | 0 VDC | 0 VDC |
| 1763487909 | 0 Count | 497 Count | 0 Count | 0 VDC | 0 VDC |
| 1763487308 | 0 Count | 488 Count | 0 Count | 0 VDC | 0 VDC |
| 1763486708 | 0 Count | 475 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)