This is the latest recevied telemetry packets stored in our database for station/object SQ4VK-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1763467095 | 719 Count | 179 Count | 61 Count | 0 VDC | 0 VDC |
| 1763466194 | 710 Count | 177 Count | 61 Count | 0 VDC | 0 VDC |
| 1763465294 | 703 Count | 174 Count | 60 Count | 0 VDC | 0 VDC |
| 1763464393 | 693 Count | 171 Count | 59 Count | 0 VDC | 0 VDC |
| 1763463492 | 685 Count | 168 Count | 59 Count | 0 VDC | 0 VDC |
| 1763462591 | 676 Count | 166 Count | 59 Count | 0 VDC | 0 VDC |
| 1763461691 | 667 Count | 163 Count | 57 Count | 0 VDC | 0 VDC |
| 1763460790 | 657 Count | 161 Count | 56 Count | 0 VDC | 0 VDC |
| 1763459889 | 650 Count | 158 Count | 55 Count | 0 VDC | 0 VDC |
| 1763458989 | 640 Count | 156 Count | 55 Count | 0 VDC | 0 VDC |
| 1763458088 | 632 Count | 153 Count | 55 Count | 0 VDC | 0 VDC |
| 1763457187 | 624 Count | 151 Count | 55 Count | 0 VDC | 0 VDC |
| 1763456286 | 617 Count | 148 Count | 55 Count | 0 VDC | 0 VDC |
| 1763455386 | 608 Count | 146 Count | 55 Count | 0 VDC | 0 VDC |
| 1763454485 | 600 Count | 143 Count | 55 Count | 0 VDC | 0 VDC |
| 1763453584 | 591 Count | 140 Count | 54 Count | 0 VDC | 0 VDC |
| 1763452684 | 583 Count | 137 Count | 54 Count | 0 VDC | 0 VDC |
| 1763451783 | 575 Count | 135 Count | 54 Count | 0 VDC | 0 VDC |
| 1763450882 | 568 Count | 132 Count | 54 Count | 0 VDC | 0 VDC |
| 1763449982 | 557 Count | 130 Count | 54 Count | 0 VDC | 0 VDC |
| 1763449081 | 551 Count | 127 Count | 54 Count | 0 VDC | 0 VDC |
| 1763448196 | 543 Count | 125 Count | 54 Count | 0 VDC | 0 VDC |
| 1763447295 | 535 Count | 124 Count | 54 Count | 0 VDC | 0 VDC |
| 1763446395 | 526 Count | 124 Count | 54 Count | 0 VDC | 0 VDC |
| 1763445494 | 518 Count | 123 Count | 53 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)