This is the latest recevied telemetry packets stored in our database for station/object SP2GSM-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1774239990 | 345 Count | 890 Count | 28 Count | 0 VDC | 0 VDC |
| 1774236389 | 343 Count | 890 Count | 28 Count | 0 VDC | 0 VDC |
| 1774230987 | 340 Count | 888 Count | 28 Count | 0 VDC | 0 VDC |
| 1774227387 | 338 Count | 885 Count | 28 Count | 0 VDC | 0 VDC |
| 1774221990 | 331 Count | 885 Count | 28 Count | 0 VDC | 0 VDC |
| 1774218389 | 329 Count | 885 Count | 28 Count | 0 VDC | 0 VDC |
| 1774205785 | 322 Count | 884 Count | 28 Count | 0 VDC | 0 VDC |
| 1774200389 | 315 Count | 884 Count | 28 Count | 0 VDC | 0 VDC |
| 1774196788 | 313 Count | 884 Count | 28 Count | 0 VDC | 0 VDC |
| 1774189588 | 309 Count | 881 Count | 28 Count | 0 VDC | 0 VDC |
| 1774184184 | 306 Count | 876 Count | 28 Count | 0 VDC | 0 VDC |
| 1774180591 | 300 Count | 875 Count | 28 Count | 0 VDC | 0 VDC |
| 1774178788 | 299 Count | 875 Count | 28 Count | 0 VDC | 0 VDC |
| 1774173389 | 296 Count | 873 Count | 28 Count | 0 VDC | 0 VDC |
| 1774169785 | 294 Count | 872 Count | 28 Count | 0 VDC | 0 VDC |
| 1774162583 | 290 Count | 871 Count | 28 Count | 0 VDC | 0 VDC |
| 1774157187 | 283 Count | 871 Count | 28 Count | 0 VDC | 0 VDC |
| 1774155389 | 282 Count | 869 Count | 28 Count | 0 VDC | 0 VDC |
| 1774153588 | 281 Count | 869 Count | 28 Count | 0 VDC | 0 VDC |
| 1774151788 | 280 Count | 864 Count | 28 Count | 0 VDC | 0 VDC |
| 1774148184 | 278 Count | 864 Count | 28 Count | 0 VDC | 0 VDC |
| 1774144583 | 276 Count | 863 Count | 28 Count | 0 VDC | 0 VDC |
| 1774140982 | 274 Count | 861 Count | 28 Count | 0 VDC | 0 VDC |
| 1774135586 | 267 Count | 860 Count | 28 Count | 0 VDC | 0 VDC |
| 1774130184 | 264 Count | 860 Count | 28 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)