This is the latest recevied telemetry packets stored in our database for station/object SR7NSI-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1777693040 | 318 Count | 278 Count | 4 Count | 0 VDC | 0 VDC |
| 1777692439 | 317 Count | 277 Count | 4 Count | 0 VDC | 0 VDC |
| 1777691838 | 316 Count | 275 Count | 4 Count | 0 VDC | 0 VDC |
| 1777691238 | 315 Count | 273 Count | 4 Count | 0 VDC | 0 VDC |
| 1777690647 | 314 Count | 266 Count | 4 Count | 0 VDC | 0 VDC |
| 1777690036 | 313 Count | 264 Count | 4 Count | 0 VDC | 0 VDC |
| 1777689435 | 312 Count | 263 Count | 4 Count | 0 VDC | 0 VDC |
| 1777688834 | 311 Count | 260 Count | 4 Count | 0 VDC | 0 VDC |
| 1777688233 | 310 Count | 258 Count | 4 Count | 0 VDC | 0 VDC |
| 1777687632 | 309 Count | 256 Count | 4 Count | 0 VDC | 0 VDC |
| 1777687032 | 308 Count | 253 Count | 4 Count | 0 VDC | 0 VDC |
| 1777686431 | 307 Count | 251 Count | 4 Count | 0 VDC | 0 VDC |
| 1777685830 | 306 Count | 249 Count | 4 Count | 0 VDC | 0 VDC |
| 1777685229 | 305 Count | 246 Count | 4 Count | 0 VDC | 0 VDC |
| 1777684628 | 304 Count | 245 Count | 4 Count | 0 VDC | 0 VDC |
| 1777684027 | 303 Count | 243 Count | 4 Count | 0 VDC | 0 VDC |
| 1777683426 | 302 Count | 240 Count | 4 Count | 0 VDC | 0 VDC |
| 1777682826 | 301 Count | 239 Count | 4 Count | 0 VDC | 0 VDC |
| 1777682225 | 300 Count | 238 Count | 4 Count | 0 VDC | 0 VDC |
| 1777681624 | 299 Count | 237 Count | 4 Count | 0 VDC | 0 VDC |
| 1777681053 | 294 Count | 236 Count | 4 Count | 0 VDC | 0 VDC |
| 1777680452 | 293 Count | 235 Count | 4 Count | 0 VDC | 0 VDC |
| 1777679851 | 292 Count | 234 Count | 4 Count | 0 VDC | 0 VDC |
| 1777679251 | 291 Count | 233 Count | 4 Count | 0 VDC | 0 VDC |
| 1777678650 | 290 Count | 232 Count | 4 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)