This is the latest recevied telemetry packets stored in our database for station/object PE1PNX-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1774023946 | 917 Count | 485 Count | 393 Count | 0 VDC | 0 VDC |
| 1774022143 | 916 Count | 484 Count | 393 Count | 0 VDC | 0 VDC |
| 1774020339 | 915 Count | 484 Count | 393 Count | 0 VDC | 0 VDC |
| 1774018535 | 914 Count | 484 Count | 393 Count | 0 VDC | 0 VDC |
| 1774016732 | 913 Count | 484 Count | 393 Count | 0 VDC | 0 VDC |
| 1774014969 | 908 Count | 484 Count | 393 Count | 0 VDC | 0 VDC |
| 1774013166 | 907 Count | 484 Count | 393 Count | 0 VDC | 0 VDC |
| 1774011362 | 906 Count | 484 Count | 393 Count | 0 VDC | 0 VDC |
| 1774009558 | 905 Count | 484 Count | 393 Count | 0 VDC | 0 VDC |
| 1774007755 | 904 Count | 484 Count | 393 Count | 0 VDC | 0 VDC |
| 1774005951 | 903 Count | 484 Count | 393 Count | 0 VDC | 0 VDC |
| 1774004147 | 901 Count | 482 Count | 392 Count | 0 VDC | 0 VDC |
| 1774002343 | 900 Count | 482 Count | 392 Count | 0 VDC | 0 VDC |
| 1774000540 | 899 Count | 482 Count | 392 Count | 0 VDC | 0 VDC |
| 1773998736 | 898 Count | 482 Count | 392 Count | 0 VDC | 0 VDC |
| 1773996932 | 897 Count | 482 Count | 392 Count | 0 VDC | 0 VDC |
| 1773995129 | 896 Count | 482 Count | 392 Count | 0 VDC | 0 VDC |
| 1773993366 | 891 Count | 482 Count | 392 Count | 0 VDC | 0 VDC |
| 1773991563 | 890 Count | 482 Count | 392 Count | 0 VDC | 0 VDC |
| 1773989759 | 889 Count | 482 Count | 392 Count | 0 VDC | 0 VDC |
| 1773987955 | 888 Count | 482 Count | 392 Count | 0 VDC | 0 VDC |
| 1773986152 | 887 Count | 481 Count | 392 Count | 0 VDC | 0 VDC |
| 1773984348 | 886 Count | 481 Count | 392 Count | 0 VDC | 0 VDC |
| 1773982544 | 885 Count | 481 Count | 392 Count | 0 VDC | 0 VDC |
| 1773980741 | 884 Count | 481 Count | 392 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)