This is the latest recevied telemetry packets stored in our database for station/object SP9LJE-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1778000289 | 867 Count | 920 Count | 793 Count | 0 VDC | 0 VDC |
| 1777998495 | 866 Count | 920 Count | 793 Count | 0 VDC | 0 VDC |
| 1777996694 | 851 Count | 906 Count | 779 Count | 0 VDC | 0 VDC |
| 1777994893 | 840 Count | 888 Count | 769 Count | 0 VDC | 0 VDC |
| 1777993093 | 829 Count | 870 Count | 759 Count | 0 VDC | 0 VDC |
| 1777991292 | 818 Count | 854 Count | 749 Count | 0 VDC | 0 VDC |
| 1777989491 | 807 Count | 839 Count | 739 Count | 0 VDC | 0 VDC |
| 1777987691 | 797 Count | 825 Count | 730 Count | 0 VDC | 0 VDC |
| 1777985890 | 786 Count | 806 Count | 720 Count | 0 VDC | 0 VDC |
| 1777984089 | 775 Count | 789 Count | 710 Count | 0 VDC | 0 VDC |
| 1777982289 | 763 Count | 767 Count | 699 Count | 0 VDC | 0 VDC |
| 1777980488 | 752 Count | 751 Count | 689 Count | 0 VDC | 0 VDC |
| 1777978687 | 741 Count | 733 Count | 679 Count | 0 VDC | 0 VDC |
| 1777978180 | 740 Count | 733 Count | 679 Count | 0 VDC | 0 VDC |
| 1777976379 | 721 Count | 707 Count | 661 Count | 0 VDC | 0 VDC |
| 1777974579 | 701 Count | 688 Count | 642 Count | 0 VDC | 0 VDC |
| 1777972778 | 688 Count | 676 Count | 630 Count | 0 VDC | 0 VDC |
| 1777970977 | 680 Count | 669 Count | 623 Count | 0 VDC | 0 VDC |
| 1777969177 | 672 Count | 662 Count | 616 Count | 0 VDC | 0 VDC |
| 1777967376 | 663 Count | 654 Count | 608 Count | 0 VDC | 0 VDC |
| 1777965575 | 654 Count | 646 Count | 600 Count | 0 VDC | 0 VDC |
| 1777963775 | 641 Count | 634 Count | 588 Count | 0 VDC | 0 VDC |
| 1777961974 | 623 Count | 613 Count | 571 Count | 0 VDC | 0 VDC |
| 1777960179 | 611 Count | 602 Count | 560 Count | 0 VDC | 0 VDC |
| 1777958379 | 600 Count | 592 Count | 550 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)