This is the latest recevied telemetry packets stored in our database for station/object SQ9PQL-00. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1781764369 | 335 Count | 378 Count | 253 Count | 0 VDC | 0 VDC |
| 1781763465 | 332 Count | 376 Count | 251 Count | 0 VDC | 0 VDC |
| 1781762562 | 324 Count | 367 Count | 244 Count | 0 VDC | 0 VDC |
| 1781761658 | 321 Count | 364 Count | 242 Count | 0 VDC | 0 VDC |
| 1781760754 | 317 Count | 360 Count | 239 Count | 0 VDC | 0 VDC |
| 1781759851 | 311 Count | 351 Count | 234 Count | 0 VDC | 0 VDC |
| 1781758947 | 308 Count | 349 Count | 232 Count | 0 VDC | 0 VDC |
| 1781758043 | 305 Count | 347 Count | 230 Count | 0 VDC | 0 VDC |
| 1781757138 | 302 Count | 345 Count | 228 Count | 0 VDC | 0 VDC |
| 1781756235 | 298 Count | 340 Count | 225 Count | 0 VDC | 0 VDC |
| 1781755331 | 295 Count | 337 Count | 223 Count | 0 VDC | 0 VDC |
| 1781754427 | 290 Count | 331 Count | 219 Count | 0 VDC | 0 VDC |
| 1781753524 | 287 Count | 328 Count | 217 Count | 0 VDC | 0 VDC |
| 1781752620 | 283 Count | 323 Count | 214 Count | 0 VDC | 0 VDC |
| 1781751716 | 281 Count | 322 Count | 213 Count | 0 VDC | 0 VDC |
| 1781750812 | 277 Count | 319 Count | 210 Count | 0 VDC | 0 VDC |
| 1781749909 | 273 Count | 315 Count | 207 Count | 0 VDC | 0 VDC |
| 1781749005 | 268 Count | 309 Count | 203 Count | 0 VDC | 0 VDC |
| 1781748101 | 262 Count | 300 Count | 198 Count | 0 VDC | 0 VDC |
| 1781747198 | 255 Count | 291 Count | 192 Count | 0 VDC | 0 VDC |
| 1781746294 | 253 Count | 290 Count | 191 Count | 0 VDC | 0 VDC |
| 1781745390 | 250 Count | 286 Count | 189 Count | 0 VDC | 0 VDC |
| 1781744486 | 248 Count | 284 Count | 188 Count | 0 VDC | 0 VDC |
| 1781743672 | 246 Count | 283 Count | 187 Count | 0 VDC | 0 VDC |
| 1781742768 | 244 Count | 281 Count | 186 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)