This is the latest recevied telemetry packets stored in our database for station/object SR9BBC-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1768525534 | 71 Count | 439 Count | 0 Count | 4.09 VDC | 0 VDC |
| 1768524633 | 66 Count | 398 Count | 0 Count | 4.11 VDC | 0 VDC |
| 1768523733 | 64 Count | 363 Count | 0 Count | 4.09 VDC | 0 VDC |
| 1768522832 | 61 Count | 329 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1768521931 | 59 Count | 296 Count | 0 Count | 4.11 VDC | 0 VDC |
| 1768521030 | 55 Count | 250 Count | 0 Count | 4.11 VDC | 0 VDC |
| 1768520129 | 48 Count | 216 Count | 0 Count | 4.11 VDC | 0 VDC |
| 1768519228 | 39 Count | 177 Count | 0 Count | 4.11 VDC | 0 VDC |
| 1768518327 | 30 Count | 145 Count | 0 Count | 4.11 VDC | 0 VDC |
| 1768517426 | 24 Count | 106 Count | 0 Count | 4.09 VDC | 0 VDC |
| 1768516525 | 17 Count | 75 Count | 0 Count | 4.11 VDC | 0 VDC |
| 1768515625 | 7 Count | 36 Count | 0 Count | 4.09 VDC | 0 VDC |
| 1768514724 | 467 Count | 1005 Count | 0 Count | 4.11 VDC | 0 VDC |
| 1768513823 | 462 Count | 949 Count | 0 Count | 4.09 VDC | 0 VDC |
| 1768512921 | 448 Count | 880 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1768512020 | 427 Count | 836 Count | 0 Count | 4.09 VDC | 0 VDC |
| 1768511119 | 422 Count | 790 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1768510219 | 408 Count | 748 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1768509318 | 401 Count | 688 Count | 0 Count | 4.09 VDC | 0 VDC |
| 1768508417 | 396 Count | 644 Count | 0 Count | 4.09 VDC | 0 VDC |
| 1768507516 | 389 Count | 616 Count | 0 Count | 4.11 VDC | 0 VDC |
| 1768506615 | 385 Count | 576 Count | 0 Count | 4.09 VDC | 0 VDC |
| 1768505713 | 378 Count | 546 Count | 0 Count | 4.09 VDC | 0 VDC |
| 1768504812 | 370 Count | 504 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1768503911 | 364 Count | 472 Count | 0 Count | 4.1 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)