This is the latest recevied telemetry packets stored in our database for station/object CR7BQX-13. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1772439547 | 199 Count | 186 Count | 60 Count | 4.14 VDC | 0.14 VDC |
| 1772437809 | 192 Count | 181 Count | 59 Count | 4.22 VDC | 0.14 VDC |
| 1772436003 | 189 Count | 178 Count | 58 Count | 4.21 VDC | 0.14 VDC |
| 1772434197 | 186 Count | 175 Count | 57 Count | 4.14 VDC | 0.14 VDC |
| 1772432391 | 183 Count | 172 Count | 56 Count | 4.15 VDC | 0.14 VDC |
| 1772430586 | 180 Count | 169 Count | 55 Count | 4.24 VDC | 0.14 VDC |
| 1772428780 | 177 Count | 167 Count | 54 Count | 4.19 VDC | 0.14 VDC |
| 1772426974 | 174 Count | 164 Count | 53 Count | 4.18 VDC | 0.14 VDC |
| 1772425168 | 171 Count | 161 Count | 52 Count | 4.15 VDC | 0.14 VDC |
| 1772423362 | 168 Count | 158 Count | 51 Count | 4.2 VDC | 0.14 VDC |
| 1772421556 | 165 Count | 156 Count | 50 Count | 4.24 VDC | 0.14 VDC |
| 1772419751 | 162 Count | 153 Count | 49 Count | 4.19 VDC | 0.14 VDC |
| 1772417945 | 159 Count | 150 Count | 48 Count | 4.18 VDC | 0.14 VDC |
| 1772416206 | 152 Count | 145 Count | 47 Count | 4.15 VDC | 0.14 VDC |
| 1772414401 | 149 Count | 142 Count | 46 Count | 4.17 VDC | 0.14 VDC |
| 1772412595 | 146 Count | 139 Count | 45 Count | 4.21 VDC | 0.14 VDC |
| 1772410789 | 143 Count | 136 Count | 44 Count | 4.21 VDC | 0.14 VDC |
| 1772408984 | 140 Count | 133 Count | 43 Count | 4.17 VDC | 0.14 VDC |
| 1772407178 | 137 Count | 130 Count | 42 Count | 4.19 VDC | 0.14 VDC |
| 1772405372 | 134 Count | 127 Count | 41 Count | 4.2 VDC | 0.14 VDC |
| 1772403567 | 131 Count | 124 Count | 40 Count | 4.18 VDC | 0.14 VDC |
| 1772401761 | 128 Count | 121 Count | 39 Count | 4.2 VDC | 0.14 VDC |
| 1772399955 | 125 Count | 118 Count | 38 Count | 4.23 VDC | 0.14 VDC |
| 1772398150 | 122 Count | 115 Count | 37 Count | 4.21 VDC | 0.14 VDC |
| 1772396344 | 119 Count | 112 Count | 36 Count | 4.14 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)