This is the latest recevied telemetry packets stored in our database for station/object IT9IJY-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1758467359 | 29 Count | 900 Count | 0 Count | 0 VDC | 0 VDC |
| 1758463750 | 27 Count | 823 Count | 0 Count | 0 VDC | 0 VDC |
| 1758460187 | 25 Count | 760 Count | 0 Count | 0 VDC | 0 VDC |
| 1758456579 | 23 Count | 700 Count | 0 Count | 0 VDC | 0 VDC |
| 1758452971 | 21 Count | 629 Count | 0 Count | 0 VDC | 0 VDC |
| 1758449363 | 19 Count | 579 Count | 0 Count | 0 VDC | 0 VDC |
| 1758445755 | 17 Count | 527 Count | 0 Count | 0 VDC | 0 VDC |
| 1758442147 | 15 Count | 473 Count | 0 Count | 0 VDC | 0 VDC |
| 1758438590 | 13 Count | 398 Count | 0 Count | 0 VDC | 0 VDC |
| 1758434981 | 11 Count | 336 Count | 0 Count | 0 VDC | 0 VDC |
| 1758431373 | 9 Count | 280 Count | 0 Count | 0 VDC | 0 VDC |
| 1758427765 | 7 Count | 216 Count | 0 Count | 0 VDC | 0 VDC |
| 1758424157 | 5 Count | 166 Count | 0 Count | 0 VDC | 0 VDC |
| 1758420549 | 3 Count | 107 Count | 0 Count | 0 VDC | 0 VDC |
| 1758416989 | 1 Count | 53 Count | 0 Count | 0 VDC | 0 VDC |
| 1758413381 | 22 Count | 1014 Count | 0 Count | 0 VDC | 0 VDC |
| 1758409773 | 20 Count | 961 Count | 0 Count | 0 VDC | 0 VDC |
| 1758406165 | 18 Count | 902 Count | 0 Count | 0 VDC | 0 VDC |
| 1758402557 | 16 Count | 848 Count | 0 Count | 0 VDC | 0 VDC |
| 1758398948 | 14 Count | 787 Count | 0 Count | 0 VDC | 0 VDC |
| 1758395387 | 12 Count | 712 Count | 0 Count | 0 VDC | 0 VDC |
| 1758391778 | 10 Count | 651 Count | 0 Count | 0 VDC | 0 VDC |
| 1758388170 | 8 Count | 525 Count | 0 Count | 0 VDC | 0 VDC |
| 1758384562 | 6 Count | 443 Count | 0 Count | 0 VDC | 0 VDC |
| 1758380953 | 4 Count | 348 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)