This is the latest recevied telemetry packets stored in our database for station/object SQ9PL-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1782012140 | 9 Count | 47 Count | 9 Count | 0 VDC | 0 VDC |
| 1782010339 | 265 Count | 1032 Count | 217 Count | 0 VDC | 0 VDC |
| 1782006738 | 245 Count | 944 Count | 199 Count | 0 VDC | 0 VDC |
| 1782004937 | 234 Count | 898 Count | 189 Count | 0 VDC | 0 VDC |
| 1782003144 | 223 Count | 855 Count | 183 Count | 0 VDC | 0 VDC |
| 1782001343 | 205 Count | 808 Count | 167 Count | 0 VDC | 0 VDC |
| 1781999543 | 197 Count | 775 Count | 160 Count | 0 VDC | 0 VDC |
| 1781997742 | 189 Count | 743 Count | 153 Count | 0 VDC | 0 VDC |
| 1781995941 | 182 Count | 716 Count | 147 Count | 0 VDC | 0 VDC |
| 1781994140 | 176 Count | 689 Count | 142 Count | 0 VDC | 0 VDC |
| 1781992340 | 169 Count | 655 Count | 136 Count | 0 VDC | 0 VDC |
| 1781990539 | 159 Count | 590 Count | 127 Count | 0 VDC | 0 VDC |
| 1781988738 | 151 Count | 553 Count | 120 Count | 0 VDC | 0 VDC |
| 1781986937 | 143 Count | 509 Count | 113 Count | 0 VDC | 0 VDC |
| 1781985136 | 137 Count | 474 Count | 108 Count | 0 VDC | 0 VDC |
| 1781983336 | 130 Count | 425 Count | 102 Count | 0 VDC | 0 VDC |
| 1781981543 | 115 Count | 376 Count | 92 Count | 0 VDC | 0 VDC |
| 1781979742 | 102 Count | 337 Count | 80 Count | 0 VDC | 0 VDC |
| 1781977941 | 94 Count | 286 Count | 73 Count | 0 VDC | 0 VDC |
| 1781976141 | 81 Count | 250 Count | 67 Count | 0 VDC | 0 VDC |
| 1781974340 | 69 Count | 222 Count | 58 Count | 0 VDC | 0 VDC |
| 1781972539 | 49 Count | 176 Count | 39 Count | 0 VDC | 0 VDC |
| 1781968938 | 33 Count | 117 Count | 25 Count | 0 VDC | 0 VDC |
| 1781967137 | 26 Count | 68 Count | 19 Count | 0 VDC | 0 VDC |
| 1781965336 | 20 Count | 40 Count | 14 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)