This is the latest recevied telemetry packets stored in our database for station/object GW3ATZ-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1778010316 | 379 Count | 579 Count | 294 Count | 4.2 VDC | 0.16 VDC |
| 1778008508 | 366 Count | 562 Count | 283 Count | 4.21 VDC | 0.16 VDC |
| 1778006802 | 359 Count | 550 Count | 278 Count | 4.22 VDC | 0.16 VDC |
| 1778004994 | 352 Count | 537 Count | 273 Count | 4.26 VDC | 0.16 VDC |
| 1778003186 | 344 Count | 524 Count | 267 Count | 4.23 VDC | 0.16 VDC |
| 1778001377 | 336 Count | 513 Count | 261 Count | 4.26 VDC | 0.14 VDC |
| 1777999569 | 328 Count | 502 Count | 255 Count | 4.25 VDC | 0.16 VDC |
| 1777997761 | 314 Count | 484 Count | 243 Count | 4.25 VDC | 0.16 VDC |
| 1777995953 | 307 Count | 475 Count | 238 Count | 4.22 VDC | 0.16 VDC |
| 1777994144 | 299 Count | 465 Count | 232 Count | 4.26 VDC | 0.16 VDC |
| 1777992336 | 290 Count | 441 Count | 225 Count | 4.24 VDC | 0.14 VDC |
| 1777990523 | 282 Count | 426 Count | 219 Count | 4.21 VDC | 0.16 VDC |
| 1777988715 | 275 Count | 414 Count | 214 Count | 4.26 VDC | 0.16 VDC |
| 1777986907 | 268 Count | 398 Count | 209 Count | 4.23 VDC | 0.16 VDC |
| 1777985242 | 235 Count | 352 Count | 178 Count | 4.22 VDC | 0.16 VDC |
| 1777983424 | 227 Count | 339 Count | 172 Count | 4.19 VDC | 0.16 VDC |
| 1777981595 | 222 Count | 332 Count | 169 Count | 4.22 VDC | 0.16 VDC |
| 1777979775 | 211 Count | 315 Count | 160 Count | 4.26 VDC | 0.16 VDC |
| 1777977967 | 199 Count | 298 Count | 150 Count | 4.2 VDC | 0.16 VDC |
| 1777976159 | 184 Count | 276 Count | 137 Count | 4.21 VDC | 0.16 VDC |
| 1777974351 | 175 Count | 254 Count | 130 Count | 4.25 VDC | 0.16 VDC |
| 1777972543 | 163 Count | 241 Count | 120 Count | 4.23 VDC | 0.16 VDC |
| 1777970734 | 155 Count | 231 Count | 114 Count | 4.19 VDC | 0.14 VDC |
| 1777968923 | 148 Count | 221 Count | 109 Count | 4.24 VDC | 0.14 VDC |
| 1777967114 | 140 Count | 212 Count | 103 Count | 4.24 VDC | 0.16 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)