This is the latest recevied telemetry packets stored in our database for station/object SR8KP-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1755672343 | 96 Count | 286 Count | 79 Count | 2.2 VDC | 0 VDC |
| 1755671442 | 89 Count | 273 Count | 73 Count | 2.2 VDC | 0 VDC |
| 1755670542 | 84 Count | 262 Count | 69 Count | 2.2 VDC | 0 VDC |
| 1755668740 | 75 Count | 243 Count | 62 Count | 2.78 VDC | 0 VDC |
| 1755667836 | 70 Count | 232 Count | 58 Count | 2.24 VDC | 0 VDC |
| 1755666935 | 64 Count | 215 Count | 53 Count | 2.44 VDC | 0 VDC |
| 1755666035 | 60 Count | 206 Count | 50 Count | 1.83 VDC | 0 VDC |
| 1755665134 | 54 Count | 193 Count | 45 Count | 2.02 VDC | 0 VDC |
| 1755664233 | 48 Count | 175 Count | 40 Count | 1.94 VDC | 0 VDC |
| 1755663333 | 43 Count | 161 Count | 36 Count | 1.55 VDC | 0 VDC |
| 1755662432 | 40 Count | 152 Count | 34 Count | 1.37 VDC | 0 VDC |
| 1755661531 | 34 Count | 140 Count | 29 Count | 1.05 VDC | 0 VDC |
| 1755660631 | 29 Count | 122 Count | 25 Count | 1.05 VDC | 0 VDC |
| 1755659731 | 23 Count | 100 Count | 20 Count | 1.16 VDC | 0 VDC |
| 1755658829 | 19 Count | 83 Count | 17 Count | 1.21 VDC | 0 VDC |
| 1755657929 | 13 Count | 62 Count | 12 Count | 1.25 VDC | 0 VDC |
| 1755657028 | 7 Count | 41 Count | 7 Count | 1.21 VDC | 0 VDC |
| 1755656127 | 450 Count | 1004 Count | 346 Count | 1.45 VDC | 0 VDC |
| 1755655227 | 441 Count | 974 Count | 338 Count | 1.34 VDC | 0 VDC |
| 1755654326 | 436 Count | 953 Count | 334 Count | 1.65 VDC | 0 VDC |
| 1755653426 | 430 Count | 931 Count | 329 Count | 1.7 VDC | 0 VDC |
| 1755652525 | 423 Count | 914 Count | 324 Count | 1.75 VDC | 0 VDC |
| 1755651640 | 416 Count | 898 Count | 321 Count | 1.44 VDC | 0 VDC |
| 1755650738 | 410 Count | 886 Count | 316 Count | 1.27 VDC | 0 VDC |
| 1755649838 | 404 Count | 875 Count | 311 Count | 1.36 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)