This is the latest recevied telemetry packets stored in our database for station/object SP1KRF-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1749186391 | 478 Count | 503 Count | 195 Count | 0 VDC | 0 VDC |
| 1749186213 | 477 Count | 503 Count | 195 Count | 0 VDC | 0 VDC |
| 1749186191 | 477 Count | 503 Count | 195 Count | 0 VDC | 0 VDC |
| 1749185075 | 474 Count | 502 Count | 194 Count | 0 VDC | 0 VDC |
| 1749183872 | 471 Count | 501 Count | 193 Count | 0 VDC | 0 VDC |
| 1749182671 | 467 Count | 499 Count | 191 Count | 0 VDC | 0 VDC |
| 1749181469 | 464 Count | 498 Count | 190 Count | 0 VDC | 0 VDC |
| 1749180267 | 461 Count | 497 Count | 189 Count | 0 VDC | 0 VDC |
| 1749179066 | 457 Count | 495 Count | 187 Count | 0 VDC | 0 VDC |
| 1749177864 | 454 Count | 494 Count | 186 Count | 0 VDC | 0 VDC |
| 1749176663 | 451 Count | 493 Count | 185 Count | 0 VDC | 0 VDC |
| 1749175461 | 447 Count | 491 Count | 183 Count | 0 VDC | 0 VDC |
| 1749174260 | 444 Count | 490 Count | 182 Count | 0 VDC | 0 VDC |
| 1749173058 | 441 Count | 489 Count | 181 Count | 0 VDC | 0 VDC |
| 1749171857 | 437 Count | 487 Count | 179 Count | 0 VDC | 0 VDC |
| 1749170655 | 434 Count | 486 Count | 178 Count | 0 VDC | 0 VDC |
| 1749169482 | 431 Count | 485 Count | 177 Count | 0 VDC | 0 VDC |
| 1749168280 | 427 Count | 483 Count | 175 Count | 0 VDC | 0 VDC |
| 1749167079 | 424 Count | 482 Count | 174 Count | 0 VDC | 0 VDC |
| 1749165877 | 421 Count | 481 Count | 173 Count | 0 VDC | 0 VDC |
| 1749164676 | 417 Count | 479 Count | 171 Count | 0 VDC | 0 VDC |
| 1749163474 | 414 Count | 478 Count | 170 Count | 0 VDC | 0 VDC |
| 1749162272 | 411 Count | 477 Count | 169 Count | 0 VDC | 0 VDC |
| 1749161071 | 407 Count | 475 Count | 167 Count | 0 VDC | 0 VDC |
| 1749159869 | 404 Count | 474 Count | 166 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)