This is the latest recevied telemetry packets stored in our database for station/object SP5JWP-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
---|---|---|---|---|---|
1744955038 | 230 Count | 615 Count | 157 Count | 0 VDC | 0 VDC |
1744954962 | 71 Count | 745 Count | 0 Count | 0 VDC | 0 VDC |
1744953238 | 225 Count | 590 Count | 153 Count | 0 VDC | 0 VDC |
1744951437 | 219 Count | 557 Count | 149 Count | 0 VDC | 0 VDC |
1744949636 | 214 Count | 530 Count | 145 Count | 0 VDC | 0 VDC |
1744947836 | 208 Count | 505 Count | 141 Count | 0 VDC | 0 VDC |
1744946035 | 203 Count | 486 Count | 137 Count | 0 VDC | 0 VDC |
1744944234 | 198 Count | 467 Count | 133 Count | 0 VDC | 0 VDC |
1744942434 | 192 Count | 453 Count | 129 Count | 0 VDC | 0 VDC |
1744940633 | 187 Count | 439 Count | 125 Count | 0 VDC | 0 VDC |
1744938832 | 181 Count | 421 Count | 121 Count | 0 VDC | 0 VDC |
1744937032 | 175 Count | 406 Count | 117 Count | 0 VDC | 0 VDC |
1744914835 | 97 Count | 196 Count | 66 Count | 0 VDC | 0 VDC |
1744913034 | 91 Count | 181 Count | 61 Count | 0 VDC | 0 VDC |
1744911233 | 86 Count | 163 Count | 57 Count | 0 VDC | 0 VDC |
1744909432 | 72 Count | 140 Count | 45 Count | 0 VDC | 0 VDC |
1744907632 | 68 Count | 123 Count | 42 Count | 0 VDC | 0 VDC |
1744905831 | 61 Count | 109 Count | 37 Count | 0 VDC | 0 VDC |
1744904030 | 56 Count | 89 Count | 33 Count | 0 VDC | 0 VDC |
1744896047 | 7 Count | 4 Count | 0 Count | 0 VDC | 0 VDC |
1744892493 | 65 Count | 702 Count | 0 Count | 0 VDC | 0 VDC |
1744890693 | 63 Count | 689 Count | 0 Count | 0 VDC | 0 VDC |
1744888892 | 62 Count | 660 Count | 0 Count | 0 VDC | 0 VDC |
1744887091 | 61 Count | 643 Count | 0 Count | 0 VDC | 0 VDC |
1744885291 | 59 Count | 621 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)