This is the latest recevied telemetry packets stored in our database for station/object CT2IKC-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1757355103 | 53 Count | 82 Count | 49 Count | 0 VDC | 0 VDC |
| 1757353299 | 43 Count | 67 Count | 40 Count | 0 VDC | 0 VDC |
| 1757351496 | 36 Count | 58 Count | 34 Count | 0 VDC | 0 VDC |
| 1757349692 | 13 Count | 18 Count | 12 Count | 0 VDC | 0 VDC |
| 1757347889 | 6 Count | 9 Count | 6 Count | 0 VDC | 0 VDC |
| 1757346085 | 643 Count | 1007 Count | 535 Count | 0 VDC | 0 VDC |
| 1757344281 | 636 Count | 998 Count | 529 Count | 0 VDC | 0 VDC |
| 1757342478 | 629 Count | 989 Count | 523 Count | 0 VDC | 0 VDC |
| 1757340674 | 622 Count | 981 Count | 517 Count | 0 VDC | 0 VDC |
| 1757338871 | 615 Count | 970 Count | 511 Count | 0 VDC | 0 VDC |
| 1757337067 | 608 Count | 961 Count | 505 Count | 0 VDC | 0 VDC |
| 1757335264 | 583 Count | 921 Count | 481 Count | 0 VDC | 0 VDC |
| 1757333502 | 576 Count | 912 Count | 475 Count | 0 VDC | 0 VDC |
| 1757331698 | 569 Count | 903 Count | 469 Count | 0 VDC | 0 VDC |
| 1757329894 | 542 Count | 857 Count | 443 Count | 0 VDC | 0 VDC |
| 1757328091 | 534 Count | 847 Count | 436 Count | 0 VDC | 0 VDC |
| 1757326287 | 526 Count | 837 Count | 429 Count | 0 VDC | 0 VDC |
| 1757324484 | 519 Count | 829 Count | 423 Count | 0 VDC | 0 VDC |
| 1757322680 | 511 Count | 819 Count | 416 Count | 0 VDC | 0 VDC |
| 1757320877 | 504 Count | 810 Count | 410 Count | 0 VDC | 0 VDC |
| 1757319073 | 494 Count | 796 Count | 401 Count | 0 VDC | 0 VDC |
| 1757317270 | 482 Count | 780 Count | 390 Count | 0 VDC | 0 VDC |
| 1757315466 | 462 Count | 744 Count | 371 Count | 0 VDC | 0 VDC |
| 1757313663 | 454 Count | 735 Count | 364 Count | 0 VDC | 0 VDC |
| 1757311901 | 449 Count | 730 Count | 360 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)